Braided fishing lines (or, as they are also called, cords) are significantly superior to monofilament counterparts in many respects. However, their price is much higher. In modern fishing markets you can find a wide variety of braided lines. What is the best braid for spinning?

Many anglers believe that good result in fishing, a braided fishing line with a minimum diameter will help to achieve. And it does not depend on the type of fishing. Those who prefer to use thin tackle make the following arguments: using a thin model allows you to minimize the effects of current and wind, and also provides high sensitivity and casting to the most remote areas.

It works, but if the fishing takes place where the probability of hooking is completely excluded. You can fish, but there is a high probability of losing the bait, catch and the braid itself. To be safe from this, it is necessary to choose a braided fishing line, taking into account its breaking load in relation to any type of fishing.

Braided fishing line for spinning: important parameters

This is one of the main characteristics to consider when buying. The angler should choose the power in accordance with the type, object and conditions of future fishing. The class of the selected gear and the features of the lures are taken into account. It is advisable to select a wicker model for spinning, looking not at the diameter in millimeters, but at the degree of its breaking load, which is indicated on the package.

On many variants Japanese made recently, the diameter is not indicated at all, but only Japanese sizes are present. The value of the most popular of them is from 0.2 to 1.5. On Japanese models belonging to the latest generation, there is a relatively accurate diameter value. And in other woods of the same kind, their real diameter is often indicated with an increase of several tenths or hundredths of a millimeter. If you set a goal, then it is quite possible to find two models that have the same diameter value and a breaking load that will be significantly different.

In addition, it should certainly be taken into account that the value of the breaking load on the node will necessarily be less than the value that is written on the package. The values ​​of the declared and actual given load very often do not coincide with each other. Differences in diameter are more significant than these differences. For this reason, when purchasing such a fishing line, you should start from the breaking load in pounds (lb). 1 pound is 2.2 kg.

"Braids" with a load of 4-6 lb (1.8-2.7 kg) are suitable for catching small fish from the shore (weighing up to 300-400 g). Fishing lines belonging to this class are perfectly combined with light and ultra-light tackle. They can be used for catching, as well as other predatory fish of small sizes, on micro jig baits, small wobblers and small spinners. The 4-6 lb options are suitable for bass fishing from a boat only. Having a load of 8.1 Olb (3.5-4.5 kg), they are used for fishing from the shore of asp, chub, small pike, ide in small reservoirs. Such braids are useful for catching small pike, perch and pike perch on a light coastal jig. They are also used when fishing for a castmaster for fish such as perch and asp.

Braided fishing line for spinning, having a strength of 12-15 lb (5.4-6.8 kg) is used in the process of fishing from a boat for pike, zander and perch of large sizes for jig lures belonging to the heavy and medium range, and for wobblers reaching up to length not more than 110 mm.

Braids with a strength value of 18-20 lb (8-9 kg) are used for fishing in conditions increased complexity(for example, if the selected area has a large number of algae, snags or stones at the bottom) from a boat to perch, pike perch or pike using jig baits belonging to the heavy and medium range, as well as in the process of catching large wobblers reaching a length of more than 100 mm.

Spinning braid for pike with a test weight over 20 lb (more than 9 kg) is used when fishing with jerkbaits and when fishing by trolling.

unwinding

This is a relatively easy setting. The most popular value is 150 m. The minimum allowable unwinding value for spinning fish is 100 m (it is used in cases where the braid is rarely used and its losses during the season are minimal). There are also options for 125 m, 135 m, 200 m, 250 m used for spinning fishing.

Cord type

There are three main groups of braided lines, differing in the type of fiber connection:

• braided - the most common, mostly soft and relatively stretchable cords, characterized by a good ratio of quality and cost indicators;
• soldered through the use of heat treatment - rigid and inextensible fishing lines with a more rounded cross-sectional shape;
• sheath-type braids - have an almost round cross-sectional shape (in such cords, the fibers are in a sheath made of high-strength material).

Weaving density

This parameter affects many characteristics of the braid: its true diameter, wear resistance and calibration along the entire length. Even the cheapest braided line will have strength several times higher than any monofilament. The denser the fibers of the cord are intertwined, the higher its characteristics will be. It is not difficult to notice the loose weaving of the cord when choosing: the fibers of a similar braided fishing line delaminate if you try to squeeze it or twist it. These braids are characterized by a predominantly flat section and are very saily under the influence of wind and water. In addition, loose braided line is highly susceptible to damage.

Paint durability

This parameter is not paramount, but also deserves attention. In some cases, when winding the line on the spool, anglers observe noticeable paint residue on their hands after the winding is completed. This indicates the unsatisfactory quality of the braid. In addition, a fishing line of this quality can generally discolor after several uses (this applies mainly to the first 10 meters, which are subjected to the greatest load when playing the fish).

wear resistance

This parameter indicates the degree of preservation of the existing characteristics of the braided fishing line during its use. Each such cord begins to wear out over time, loses its strength and piles. The most durable are the classic type cords, made of high-quality material, having a smooth and slippery surface and woven in the most dense way. Loose classic and hard soldered cords wear out much faster with regular use and rarely last more than one season.

Braided fishing line for spinning: an overview of popular

Sensitive braided fishing line of increased strength. It is well suited for medium-weight spinning. Unwinding, which is 150 m, will allow you to use it for a long period. Woven quite tightly. It has a round sectional shape and a slippery surface. You can use this option when catching fish such as pike perch and pike, using jig baits weighing 10-50 g, as well as for twitching on large wobblers. The stretch of this cord is minimal. Breaking strength, although it may be less than 6.8 kg declared, but for the majority of cases it is well suited. The diameter of this braid allows it to actively work with baits weighing from 10 g. The material from which the cord is made does not absorb water, that is, it fully retains its qualities when working underwater. Available in white and acid green.

Elastic highly sensitive braided fishing line, characterized by a high density of weaving and a round diameter. It is characterized by ease of unwinding, high wear resistance and excellent strength.

This braid usually does not list the breaking strength in pounds, but rather a diameter of 0.15 mm and a breaking strength of 9 kg. This figure does not correspond to the indicated 10 lb at all, the true breaking strength of this model is approximately 15-16 lb. The actual value of the diameter of this cord is not less than 0.23 mm. An excellent choice for medium-weight spinning. Can cope well with shells and an abundance of snags. Suitable for jig fishing in conditions of excessively cluttered bottom and an abundance of underwater vegetation. The unwinding is 135 m. In most cases, such a model can withstand a couple of seasons.

Great for serious fishing predatory fish. This model is quite durable, has high wear resistance, but less dense weaving than the previous ones. Almost does not shaggy with active use. The actual diameter of such a braid is 0.25 mm, which differs from the declared 0.12 mm. Unwinding is 100 m. It is used for feeder fishing, as well as for trolling and jig fishing in “strong” places. Provides the ability to unbend in the case of "dead" hooks, which in turn saves the bait. Effectively "rescues" wobblers from the hooks, which are characterized by high cost.

P-line Spectrex 0.23 mm, 15 lb

Significantly differs from the options discussed above by an increased level of sensitivity. It also features easy unwinding (136 m), high strength and reasonable price. Its wear resistance is not very high, but this disadvantage is inherent in all cords made by heat treatment. Using working part this braid begins to fray over time. This does not affect the strength, but it makes it a little difficult to use it when fishing with baits that have a relatively small weight. If you use baits weighing more than 10 g, fishing will take place without such inconvenience. The available tensile strength of this model is consistent with the declared, and the diameter is slightly less than indicated. Well suited for fishing on a relatively clean bottom, on lures weighing more than 10g.

This braided line for spinning was able to adequately show itself in the process of twitching fishing for deep wobblers. The unwinding of such a cord is 150 m. It fully complies with the indicated characteristics, does not shag when used, and has a good reach. This braided fishing line is distinguished by the following: for its manufacture, a hybrid eight-strand material is used, consisting of 4 polyester fibers and 4 polyethylene fibers. Due to this feature, such a cord is resistant to wear and has a sinking property, helping to deepen deep wobblers.

Varivas Super Trout Advance Max Pe 0.148mm, 11lb

This spinning braid belongs to the category of Japanese-made models, which are distinguished by an impressive cost. It has a round section and a slippery surface, has the most durable weaving. Such a fishing line is mainly used when fishing with a wobbler for a chub in small reservoirs. In addition, such a line can also be used for light fishing for pike from the shore and in the process of catching asp in the wake with castmasters. The breaking strength of this model is approximately 8 lb, the diameter is exactly as indicated.

One of the thinnest braided lines for spinning. The unwind is 120 m. It can be used in combination with baits weighing from 1 to 9 g and ultra-light tackle. Features a super tight weave and high abrasion resistance. Thanks to the slippery surface of the cord, it provides maximum reach. This spinning braid is suitable for fishing sea ​​fish small in size, living on a rocky bottom and belonging to the rockfish family. It wears out quite slowly, but the small diameter of the cord allows frequent breaks during hooks.

Varivas Lite Game Mebaru 0.4 mm, 8 lb

A worthy Japanese-made model, also designed for catching marine prey belonging to the rockfish family. It has a dense weave and a slippery surface. It is used for micro jig fishing for fish such as perch. The actual breaking load is approximately 3 kg, which makes it possible to use this braid not only when fishing for perch, but also when fishing for larger fish.

Beware of fakes

How to choose a spinning cord and not buy a fake? Most often, such popular brands as Power Pro and Fire Line are counterfeited, the unchanging leaders in the number of fakes of which have been continuing to remain for quite a long time. braided cords American-made Power Pro. How to distinguish a fake from a product High Quality? Power Pro originals differ exclusively in odd diameters and are sold in plastic packaging, which must have a barcode. The package should contain an insert indicating the appropriate components for a particular model. The fishing line itself must be wound on a special reel, which allows high-quality winding of the fishing line on the spool.

• Benefits of fluorocarbon line for winter fishing ⇩
• Why is fluorocarbon line better than regular line? ⇩
• Top 7 best fluorocarbon lines for fishing with prices ⇩
• Sufix ⇩
• Tiagra ⇩
• Ion power ⇩
• Owner ⇩
• Megastrong ⇩
• ADES Daiwa ⇩
• SHIMANO ANTARES FLUOROCARBON ⇩
• Which fluorocarbon line to buy? ⇩
• Fluorocarbon line diameter value ⇩
• Each type of fishing has its own fishing line ⇩
• User reviews of fluorocarbon fishing line for winter fishing ⇩
• Tips from experienced fishermen ⇩

For many men, fishing is their favorite pastime. Firstly, fishing is a great pastime, an opportunity to be on fresh air, nature and catch more to the same fish. Secondly, it causes genuine excitement and a desire to get ahead of, say, a friend in fishing, because men are driven by the spirit of rivalry.

These two components can make fishing successful only if all the necessary gear is prepared for this event. The main tackle is a fishing rod, and its main element is a fishing line.

It is she who has all the load when the fisherman drags the fish, so there are different types of woods. It is worth noting that of all the variety, it is the fluorocarbon thread that is gaining momentum. More about fluorolesque below.

Fluorocarbon is a polymer created by combining fluorine and carbon. This material has high operational characteristics and does not give in to combustion.

It is characterized by increased wear resistance and almost imperceptible "stay" in the water. This is due to the low refractive index of light in fluorocarbon line, which is almost the same as the refractive index of light in water.

The main characteristics of such material:

1. Fluronite is resistant to various temperature changes. Even in cold winters, its use is possible.
2. The polymer does not collapse under the influence of water, that is, it does not change its operational properties.
3. Fluorocarbon line is almost invisible in the water. Of course, it does not have 100% transparency, but it is close to the ideal of all woods. Given that any fisherman strives to create conditions for fishing that are close to real, in terms of bait supply, this quality of fluronite is priceless.
4. It has an increased “sensitivity” to fish, and this sensitivity, in turn, is transmitted to the fisherman through the fishing line. This is ensured by the rigidity of the fluorocarbon tackle.
5. Due to the relatively high stiffness index, such a fishing thread is very durable, it is not afraid of stones, snags, if it suddenly catches on them.
6. The fluorocarbon polymer has good mass, which makes it possible for the fishing line to sink to the bottom of the reservoir freely and quickly.

Benefits of fluorocarbon line for ice fishing

As noted above, fluorocarbon thread is relevant not only in summer, but also in winter. It perfectly tolerates low temperatures, even extreme ones, dropping to 30 degrees below zero.

Another indisputable advantage of fluorocarbon line for ice fishing is that it is resistant to abrasion. In winter, the constant contact of gear with ice is inevitable, which can harm the thread, but not the fluorocarbon one.

Why is fluorocarbon line better than regular line?

In order to determine what is better tackle from fluorocarbon compared to conventional, it is necessary to compare their qualitative characteristics.

Here is an analysis of the main indicators:

1. First of all, strength is the most important indicator any tackle. So the fluorocarbon thread in water is very strong, it has a low breaking load coefficient. Ordinary tackle is inferior in this indicator, it becomes thicker in water, and, therefore, more fragile.
2. The “camouflage” of the fishing line is its no less important indicator. All fishing lines, at first glance, do not differ much from each other, but in the aquatic environment everything changes. The fluorocarbon version acquires transparency due to the correct refraction of light.
3. Quantity and quality of bite. An angler using a fluorocarbon rod has a higher bite rate than an angler using a regular line. In addition, the number of exits in the first case is reduced to a minimum.

The use of fluronite in its pure form is not always justified. This is due to some of its shortcomings:

1. Fluronite is strong when immersed in water. Such threads for fishing are adapted for heavy loads, including breaking ones.
2. Fairly high price. This is practically the most expensive option of all types of woods that are available. The high cost is justified by a number of undeniable advantages of fluorocarbon.

Top 7 Best Fluorocarbon Lines for Fishing with Prices

Fluorocarbon tackle is different breaking load and diameter. These parameters affect the formation of prices, and the manufacturer of fluronite is also of great importance. Here are the top 7 fluorocarbon products:

Sufix

Japan. The fishing line of this manufacturer is similar to nylon threads. A very high quality polymer product that has all the qualities it needs. A coil (100-150 meters) of such a thread costs about 140 rubles, there are also more expensive samples up to 900 rubles.

Tiagra

Japan. Fluorocarbon tackle from this manufacturer is very reliable, high quality. The price varies from 160 rubles and above.

ion power

Japan. Sports variant fluronite. Almost invisible in water, resistant to external aggressive environment. It costs from 250 rubles approximately.

Owner

Production: USA. Very popular view fluorosnasti time-tested. The price is about 300 rubles, depending on the timber capacity and above.

Megastrong

Chinese manufacturer. A good tackle and, if used correctly, it will last a long time. The prices are different, depending on the class to which the fluorocarbon belongs: extra class - the price is about 400 rubles, economy class - lower in cost.

ADES Daiwa

Japan. The price starts from 150 rubles. It has a high rate of transparency, increased wear resistance, there is practically no tensile memory.

SHIMANO ANTARES FLUOROCARBON

With this fluorocarbon tackle, the bite will go with a bang. It has all the qualities that real carbon should have. The price is about 400 rubles and more.

All prices are for fluoro gear, which are not fakes and are made of 100% fluorine and carbon.

Which fluorocarbon line to buy?

Any person often wonders what to buy and what not. This also applies to fluorocarbon tackle. To make the right choice, you need to focus on your fishing needs. In this regard, one or the other option is selected. It is worth paying attention to the extensibility of the tackle and its transparency indicator. The quality of fishing will depend on this.

The value of the diameter of the fluorocarbon fishing line

The diameter of the fishing line excites every fisherman. Most agree that the thinner the "water" thread, the better. It is believed that it is less noticeable in the water. This diameter tackle is good, but not for all rods. It is especially suitable for "sensitive" rods or spinning rods. Larger tackle options are ideal for spinning reels where the line is wound with some effort.

Each type of fishing has its own fishing line

For fishing different fish different fishing rod equipment is used. First of all, it concerns the fishing line. Depending on the diameter, one or another type of fluronite is selected:

1. The diameter of 0.10 mm fishing thread is ideal for catching fish such as perch, ruff, roach. These are all fish that do not weigh much, so tackle of this thickness will do just fine.
2. The diameter of 0.12 mm is suitable for bait fishing, not too heavy, as well as jigs.
3. The thickness of 0.14-0.16 mm fluronite ensures catching larger fish, also restrains strong jerks of fish, preventing blurring of the fluronite.
4. The thread thickness of 0.18 mm is ideal for fishing in deep waters, especially in winter.

User Reviews of Fluorocarbon Ice Fishing Line

How to tie a hook to fluorocarbon line?

In order to securely tie the hook to the fluorolace, you can use one universal knot.

The tying scheme is as follows:

• Thread the thread through the eye of the hook and pull it through about 10 cm.
• From the resulting segment, make a loop.
• Wrap the shank of the hook with the remaining part of the thread.
• Thread the end of the fishing line into the previously formed loop.
• Moisten the winding area with water, then, pulling both ends of the thread, tighten a strong knot.

Council number 1. In order for the fishing line to retain its original qualities for a long time, cut off from the reel desired length a piece of fishing line, wipe it with a solution of glycerin. Next, the cut line is wound on a cardboard and stored in a paper bag in a dark, cool place.

Council number 2. So that unnecessary creases and kinks do not form on the fishing line, the reel is rubberized by putting on it any trimmings of rubber pipes.

Council number 3. To remove rust from the hooks, you need to stick them into a bar of soap. After a while, the rust will come off.

Thus, fluorocarbon fishing thread has a number of undeniable advantages. Thanks to them, it is a real find for any angler.

This fishing material provides successful fishing, if only because such a fishing line is practically invisible in the water. It is easily and quickly immersed in water, and almost does not deform at all during use. The purchase of a fluorolesque is justified in big catch and, consequently, a good mood.

Fluorocarbon fishing line for ice fishing - characteristics, advantages and disadvantages. Link to main post

• Editorial
• about the project

Fishing for bream on the feeder from the shore

The bream is a pretty smart fish. Mature representatives of this species keep mainly at depth. Therefore, catching this fish from the shore is not an easy task. There is no way to do without a feeder rod. This is a universal tool for catching fish at depth. On the feeder you can catch not only bream, but also larger fish: carp, catfish, crucian carp. In this article we will deal with equipment designed for catching bream from the shore. Consider which rod to choose, which reel to equip, as well as which line to use. We will also tell you what kind of bait to buy and use a stand.

Feeder rod

The choice of rod depends on the characteristics of the reservoir where fishing will take place. For a small river, a feeder up to three meters long is enough. If our reservoir is wide enough and long-distance casts are planned, the rod should be chosen from three meters and above. The further the cast, the longer the rod. Separately, it is worth paying attention to the test of the feeder used. The test is the mass of the thrown load for which the rod is designed. As a rule, the stronger the current, the more weight feeders. For a strong current, the weight of the feeder can reach one hundred grams, with a weak current, about eighty. After choosing a rod, we proceed to the choice of the reel to be used.

• Reel for catching bream on the current ↓
• Fishing line for bream fishing ↓
• Feeder equipment for bream fishing on the current ↓
• Equipment for the feeder "Gardner's loop" ↓
• Equipment for the feeder "asymmetrical loop" ↓
• Bait for bream ↓
• Rod stand ↓
• Let's start manufacturing: ↓

Reel for catching bream in the current

Since fishing for bream with English tackle involves the use of heavy reels, it should be chosen from traction options. For our purposes, we need a coil with a low gear ratio. It should be between 1:5 and 1:6. With a higher gear ratio, the coil will quickly fail. Size 3000 will do. Don't forget to adjust the friction brake so that you won't be left without a rig during sharp jerks of large fish.

Line for catching bream

Braided fishing line

For bream fishing in places where there is a current, the braided line has proven itself well. With the same diameter with a monofilament, the “braid” is much stronger. Also, the “braided” line has zero stretch, which will positively affect the sensitivity of our tackle and will allow you to determine the beginning of the bite of even the most “sluggish” fish. The diameter of the fishing line should be taken 0.12 millimeters. This is the optimum thickness.

Feeder equipment for bream fishing on the current

After we have chosen a rod, reel and fishing line, we need to tie the fishing equipment. Since the place of fishing is assumed to have a current, in these cases two types of equipment have proven themselves best, the "Gardner loop" and the "asymmetric loop". Let's take a closer look at how to make them.

Equipment for the feeder "Gardner's loop"

There are two options for making this type of tackle. The first - on the main fishing line, the second - on a separate piece and subsequent installation to the base. There is no consensus on which is better. As a rule, novice anglers knit on a separate piece to practice knitting techniques. More experienced knit immediately on the basis. So, let's start knitting gear:

1. At the end of the main fishing line we make a small loop (for a leash).
2. We retreat the distance from the finished loop to the length of the palm.
3. At the measured place, we knit a large loop in such a way that a feeder passes through it.
4. We put the feeder on the swivel and fasten it to a large loop.
5. We attach a leash with a hook to a small loop. The length of the leash is from thirty centimeters.

Equipment for feeder "asymmetrical loop"

According to experienced anglers, this is the most sensitive equipment, transmitting even the weakest and most cautious bite. For its manufacture you need:

1. Cut off a piece of fishing line one meter long.
2. We fold our piece in half.
3. We tighten one end so that in the end it is ten centimeters longer than the other.
4. We tie the ends. A longer one will serve for attachment with the main fishing line. We make a loop on it and put a swivel.
5. In the loop we put the feeder on the swivel. The feeder should slide freely along the loop.
6. We pull the loop over the feeder on one side and over the knot on the other.
7. On one side of the loop, we retreat from the feeder a distance equal to one third of the length of the loop and knit a twist for the leading leash.
8. The twist should be ten centimeters long, at the end of the knitting we fix it with a double knot, leaving a loop for attaching the leash.

The result is a loop, with halves different lengths. A sliding feeder is fixed on the long half. Now that the gear is ready, it's time to talk about bait.

Autumn bream fishing on the feeder. Equipment, bait, bait.

How to catch bream from the shore or boat? Let's find out in this article.

We make the best bait for bream from a variety of products.

How to increase the catch of fish?

For 7 years of active passion for fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

1. Cool activator. This addition of their dry blood attracts fish most strongly in cold and warm water. Discussion of the bite activator "Hungry Fish".
2. Increasing gear sensitivity. Read the appropriate manuals for the particular type of tackle.
3. Pheromone baits.

Bait for bream

Of the purchased bait mixtures, the most common are:

FISH DREAM "Bream". This classic groundbait has a spicy, sweet smell, is moderately viscous, and has a brown color. Contains crushed flaxseed. The grind is even. FISH DREAM also produces other groundbaits, Bream Peas, protein-rich groundbait Bream + Betaine and Cold Water Bream.

Flagman PROFESSIONAL "Bream". This bait picks up large fish well. The grinding is medium with a content of large particles. The smell of the mixture is gentle.

Sensas 3000 Super Black "Bream". This manufacturer produces several types of bait mixture for bream, adapted to different conditions fishing.

Rod stand

For feeder fishing for bream, you need a rod stand. Some simply use a slingshot, sticking it into the ground and laying a feeder on it, resting the other end on the soil. You can also buy a stand in the store. We will now tell you how to make a stand for a feeder from a plastic hanger yourself. For this we need:

• A suitable plastic clothes hanger, in which the hook is removed and the diameter of the hole for it is just over six millimeters.
• Rubber tube, suitable diameter for the thickness of the hanger.
• A building stud 6 mm threaded, or for example a tube from an old cornice, with the same diameter.
• 6 mm wing nut and nut.
• Sharp knife or hacksaw.

Let's start making:

So, we tried to tell you how to catch bream on a feeder. We hope our tips were helpful to you. Good luck and happy fishing.

How to choose a braided cord or criteria right choice wickerwork

The problem of selecting a braided line has always been considered one of the main ones when arranging gear in any direction. fishing. Any angler always tries to choose a braided line thoroughly and not in vain. The result of fishing, as well as the ability of a spinner in one way or another, often depends on a properly selected braided fishing line.

The strength of the tackle, its sensitivity and information content depend on a well-chosen braided cord. Not all lines allow you to fish in difficult conditions. Also, not every braid can be used with any bait and spinning fishing methods. Therefore, today any angler can safely say that a braided line has an important impact on the characteristics of the tackle and its capabilities in the fishing process.

The main indicators of braids

When choosing braid, experienced anglers pay attention to many indicators that the manufacturer indicates on the reel. Sometimes these few inscriptions carry a lot of information, which is decisive in the final choice. Also in our time about braided cords, a lot of information and reviews can be obtained on the Internet and this opportunity should not be neglected.

In general, the main indicators of braided lines, which determine their purpose and operating parameters, are the following:

• type of cord weaving and fibers used;
• the diameter of the braid and its roundness;
• smoothness of the surface of the cord;
• abrasion resistance and wear resistance.

Let's consider each characteristic in more detail.

Weaving type

All braided fishing lines are divided into two large groups, which are characterized by the method of weaving the fibers.

• Cords obtained by classical plexus. In this case, all the fibers of the braid are intertwined. Each manufacturer has its own weaving technology, which determines how the product will turn out. The method of weaving, its quality and density determine the roundness of the cross section of the cord, its strength indicators and other important characteristics.
• Soldered or sintered cords, in which the fibers used are not intertwined, but are placed parallel to each other and then soldered in a certain way. Each manufacturer producing sintered cords uses different heating technologies and different binding materials that determine the stretch, roundness, strength and other parameters of the braid.

In general, there is no particular difference when choosing a multifilament fishing line of one group or another. First of all, the parameters that determine its direction and ability to work in given fishing conditions are important in the line.

Diameter

Each manufacturer must indicate the diameter on the braided reel. But, if for a nylon fishing line the diameter is a fundamental indicator and it is easy to calculate, or rather, measure in the simplest ways, then the diameter of the cord is not such an unambiguous characteristic.

• Firstly, every cord manufacturer, even the elite ones, sins with exaggeration. That is, it indicates a diameter smaller than it actually is.
• Secondly, a perfectly round section is predominantly found in braids from the elite segment, and inexpensive laces usually have an oval section or are completely flat.

It is obvious that it is actually impossible to measure such a diameter, but it is realistic only to calculate some average value. Therefore, when choosing a braid, it is always worth visually evaluating its roundness and diameter, as well as touching and twisting it with your fingers - a flat braid is immediately felt tactile.

Another thing is the load that a braided fishing line can withstand. Typically, the manufacturer indicates it in pounds (lb) and less often in kilograms. Well-known manufacturers value their reputation and try to indicate the most honest values. It is also very important how the braid holds the load on the knots.

Any knot for all cords in a row will not work, so it is better to pay attention to the manufacturer's recommendations. The durability of the braid is also important, as there are times when, after a season of intensive fishing, the line simply begins to “crumble”. Previously, this was especially often observed with eight-core braids, even very expensive ones.

Surface smoothness

The range of the cord depends on how smooth the surface is. For fishing from a boat, this parameter is not as important as when fishing from the shore. Smooth braid allows you to cast baits at very decent distances, which is required for coastal jigging. The same qualities will be required by asp fishing, in which the maximum casting distance is a decisive factor in successful fishing.

Abrasion resistance and wear resistance

This indicator is important when fishing is carried out in difficult or extreme places. An abrasion-resistant line is required by "jigits", who often fish in strong snags, where the line is constantly in contact with the branches of flooded trees. Also, such braids are used when fishing on the bottom, overgrown with shell rock, or rocky and pebbly areas.

Which cord to choose

So, the selection of braid should be carried out for a specific fishing method and conditions, paying attention to the parameters discussed above. The price of the cord, of course, determines its quality. If for some reason the spinning player cannot allocate a decent amount for the purchase of an expensive braid, then you can pay attention to Sufix, Salmo fishing lines, the Sunline budget segment, the famous Power Pro also costs a little. Of the elite lines, it is impossible not to mention Varivas, YGK, Seaguar, the expensive Sunline segment.

Edward Ball – Specially for the site SamodelkiFish – fishing, Ukraine, Kyiv

• Tee on a spinner - sharpen or change?
• Carp and feeder fishing

I am already familiar with Bobbing products. (I have several braids of different diameters) And I even did a review on Therefore, when I saw a discount on this braid at a sale, 300 meters long for a little over 9 dollars, I bought it without hesitation.
It was still summer. The wicker parcel came pretty quickly, but it just hung in my fishing box idle.
But with the advent of winter, I found a use for it. And I liked this application. But first things first.
The braid came in a rather shabby box. Don't know. Either the store has already sent this one, or it has suffered on the way:


Braided spool inside:




More precisely, three coils connected together, with a wound braid of 100 meters each:

A feature of this braid is its color. Changing every meter. As a result, at 300 meters we have a beautiful rainbow:


This coloring is made for a reason. It is needed to control the length of the braid. Convenient for trolling fishing and casting spinning.
The weave itself is quite thin. I have nothing to measure its thickness, so I can’t say for sure whether there is 0.12mm or not:




I liked the quality. The braid is not shaggy, visually it has the same thickness along the entire length.
Really very tear resistant. I couldn't tear it apart with just my hands. She begins to cut her fingers, but does not want to tear. This gives hope that there will be no problems with not very large specimens of perch and pike (which prevail in our area). They won't gnaw or bite.
This time I decided to use the braid in the vents. Many fishermen are very fond of the first winter ice. And I am no exception. At this time, you can catch quite a lot of pike, which is still actively feeding.
Therefore, for testing, I bought two offline girders:


And he equipped them with a monitored wickerwork:


Since the braid is very strong, you have to cut it with this tool:


I did not wind all 300 meters. Limited to only 1 coil out of three. This is approximately 50 meters for each vent:




Although in fact I did not wind exactly, and most likely it turned out to be about 30 and 70 meters on two coils.



I went fishing last weekend. And as you know, most often fishermen bite either yesterday or tomorrow. But today it does not bite. So my trip was also not very successful for the catch. I caught a few eyelets on the balancer:


And a very small pike, about 600 grams, which pecked precisely at the zherlitsa with monofilament:

(at the same time, I had 8 zherlits installed) But in defense of my fishing sentiment is the fact that it was a single pike among a dozen fishermen who were fishing nearby.
Based on one fishing trip, I can already draw one conclusion in favor of braided line: it is much better seen on white ice, unlike fishing line. This simplifies its search and the process of winding. Definitely now I will put braid on the vents. Luckily I have it in stock.
But the remaining 200 meters of this particular braid will probably not go to the vent, but to the recently arrived new PisciFun Torrent multiplier reel.
That's all. I finish the review. There won't be any conclusions. The braid is good, the price is comparable to offline offers, but at least I have already come across the Bobbing company, and it suits me. I probably won't recommend. Not because it's bad, but because there are a lot of fishermen here (judging by the comments to previous reviews) and everyone has their own preferences. I just talked about mine. Therefore, not a tail for everyone. And good catches.

I plan to buy +7 Add to favorites Liked the review +32 +41

Network, or cord- This is a fishing line that consists of several individual fibers. Due to this structure, it has a number of benefits compared with monofilom, appeared at the disposal of anglers much earlier.

This fishing line almost does not stretch even on long throws, it has no memory and is different high strength with a small diameter.

fiber, of which the cord consists, can be braided or soldered by thermal way. The method of manufacture practically does not affect its working qualities. To choose a good braid, you need to pay attention to other characteristics.

The main characteristics that determine the working qualities of the braid include it, density and color.

Diameter

The thinner fishing line, topics further you can cast the bait equipped with her gear. In addition, a small-diameter line provides minimal resistance to the flow of water during the retrieve, and when fishing with it in the current, it is easier to perform the correct animation of the lure. Therefore, from two cords with the same breaking load, it is preferable to choose thiner.

But you need to keep in mind that almost all manufacturers underestimate the diameter of the braid, and the numbers that are indicated on the packaging are usually not true. It is difficult to accurately measure the thickness of the cord with a caliper or micrometer, since most of them are not round in cross section. Therefore, first of all, when choosing, you need to focus on breaking load braided line.

, or braid test, indicated on the spool of fishing line in kilograms or libra. One libre is approximately equal to 454 g. Using a stronger line allows you to fish with large heavy lures, without fear that the equipment will break during a sharp cast, and to play trophy-sized fish.

Also when fishing with a braided line with a large breaking load is reduced to minimum probability decoy losses, which can be released after hooking on grass or bottom obstacles by pulling on the fishing line. But ceteris paribus, stronger cords also have a larger diameter, so you need to be able to choose the right line for certain fishing conditions.

Color

Unlike monofilament or fluorocarbon, braid is opaque. Her color plays great importance when catching. The visibility of the fishing line both for fish and for the angler depends on the color. If the braid is clearly visible to the spinner, it is much easier to control the wiring of the bait and track bites.

On sale you can find the cords of the most different colors -camouflage marsh green to vibrant fluorescent pink. There are also braids, the color of which changes every 10 meters. This allows you to track the release range of the bait. They are used for plumb fishing, and.

Density

How denser braid, especially durable she will appear. Loose cords quickly begin to unravel and become unusable. Besides, dense braided line easily passes through the through-rings of the coil and has minimal resistance to flow. To determine the density of the braid, you need to fold it in half. A loose cord will begin to unravel at the point of inflection; it is better to refuse to buy such a fishing line.

Popular manufacturers

in number the most popular manufacturers fishing lines included Power Pro, Spiderwire and Berkley.

PowerPro

This braid remains most popular among anglers for many years. Power Pro cords are different good strength And sensitivity. But a large number of fakes are on sale, many of which last no more than a month.

Spiderwire

Produced under this brand round braided section with a smooth surface. Spiderwire cords are impregnated with high pressure polyethylene and Teflon, thanks to this treatment they become more durable, and their workers quality are improving.

Berkeley

This company produces FireLine braid, which is manufactured made of Microdynema fiber, different increased strength. Thanks to a special coating, this cord has high rigidity, it is resistant to abrasion And does not absorb water.

Fishing methods

Braid for pike relevant especially with fishing methods that require long-range casting And high sensitivity snap - spinning and feeder. She is the main type of fishing line, which is used for distances over 30-40 meters. If fishing takes place under the shore, it is better to use monofil.

Network also suitable to catch a predator, And . There are no special requirements for the cord when choosing it, The main thing -choose a fishing line of suitable strength, which will allow you to cope with hooked trophies. Monofil when fishing with these gear, it has an advantage, since it is less noticeable to fish.

Braid for spinning

Network made a real revolution in spinning fishing. It provides very high sensitivity tackle and maximum control over the bait during posting. Its benefits especially relevant when fishing for And requiring jerky wiring. Network- the main type of fishing line used for spinning by advanced anglers.

Advantages and disadvantages

The main advantages of braiding:

• zero stretch;
• lack of memory;
• high strength with small diameter.

Unlike monofilament, network practically does not stretch. Due to the zero stretch of the cord, all information from the bait is clearly transmitted through the spinning rod to the angler's hand.

That's why make the correct wiring turns out easily. After biting fish when fishing with a braid, you can do good undercut, while due to the high extensibility of the monofilament, the effort applied by the angler with a sharp swing of the rod practically does not reach the hook.

Thanks to lack of memory cord not going to rings and after leaving the spool of the coil. Therefore, when fishing with him, you can do longest throws. Also, due to the lack of memory, the wiring of the bait becomes more comfortable.

With the same diameter, the braided line significantly exceeds the strength of the monofilament. Thereby range increases casting baits, and perform the correct animation when fishing in the current, it becomes much easier.

The disadvantages of braiding include:

• lack of shock absorption of fish jerks;
• visibility in the water;
• high price.

Because of his zero stretch cord does not smooth out the jerks of a hooked trophy during the fight, as a result drop probability. To avoid this, you need to use a quality coil with a properly tuned friction brake. It is also important to master the technique of fighting.

Because of his opacity network highly visible in the water fish. When fishing for pike, this is usually not a big deal, but the type of line can scare away other fish such as perch, trout or grayling.

Braid is several times more expensive than monofilament. As a result, many novice anglers refuse to buy it, but you should not do this. Due to its advantages Cord provides maximum comfort And productive fishing, while it is much more durable than monofilament.

Which braid to choose for spinning for pike, depending on the place of fishing and the season

More thick braid must be used when fishing in or among algae. In this case, the strength of the cord will be enough to release the bait after the hooks. For fishing in snags, you can put hooks on them that unbend under high load. When fishing on the open bottom, smaller diameter lines can be used.

It is also preferable to use more thin braids when fishing in the current and at great depths- with such fishing lines, it is easiest to make the correct wiring of the bait. But the breaking load of the cord should be sufficient to confidently pull out the trophy that has sat on the hook.

For fishing in the second half of spring, in summer and autumn, when the fish shows active resistance when playing, it is preferable to use stronger cords. Thin braids better suited for winter fishing and in early spring in clear water when the fish are more passive.

Color

Most anglers prefer to use braids. camouflage swamp green. But you need to keep in mind that in the water, due to its opacity, the fish can clearly see a cord of any color.

At the same time, cords light fluorescent colors- yellow, green, orange, pink - are better visible to the angler during posting. When using them very convenient to control wiring bait and track the most careful touch of the fish on the bait. Therefore, many advanced spinningists prefer just such cords.

In the event that the equipment must be as inconspicuous as possible for fish, you can use long fluorocarbon. When using it, the number of bites is significantly increases. The use of fluorocarbon is especially important when fishing spinning in winter on water bodies that are not covered with ice, and in early spring.

The water at this time is transparent, and the predator is passive and behaves cautiously. In late spring, summer, and generally a braided rig and a metal leash work well.

When choosing wickerwork depending from the size of the alleged trophies you can navigate to the following numbers:

• for small pike fishing suitable braided line with a breaking load of the order 4-4.5 kg, with such a cord, you can confidently pull out trophies weighing up to 2 kg;
• if you are going to catch medium sized predator, you need to use a fishing line with dough 7-7.5 kg- it is enough to pull out a pike with a mass up to 6 kg;
• if I can be present in the catches pikes weighing more than 5-6 kg, suitable braided line with breaking load from 8 to 20 kg.

Most versatile braided line with breaking load about 7 kg. Its strength in most cases is enough to fight fish. Also, when fishing with it, there is always a good chance to release the bait from the hook.

Network has significant advantages before monofilament which made it the main line type used in modern spinning. It can also be used for fishing donk, zherlitsy, mugs and float bait bait. Braid is more expensive than other types of line, but you should not spare money on it - thanks to its outstanding workers qualities she makes a catch most comfortable and efficient.

Useful video

How to choose a braided cord for spinning in the video below: