Braided fishing lines (or, as they are also called, cords) are significantly superior to their monofilament counterparts in many respects. However, their price is significantly higher. In modern fishing markets you can find a wide variety of braided lines. Which braided line is best for spinning?
Many fishermen believe that a braided line with a minimum diameter will help achieve good results in fishing. Moreover, this does not depend in any way on the type of fishing. Those who prefer to use thin tackle put forward the following arguments: using a thin model minimizes the influence of current and wind, and also provides high sensitivity and casting to the most remote areas.
This works, but only if the fishing takes place where the likelihood of a hook is completely excluded. You can fish, but there is a high probability of losing bait, catch and the braided line itself. To be safe from this, you need to choose a braided fishing line taking into account its breaking load relative to any type of fishing.
Braided fishing line for spinning: important parameters
This is one of the main characteristics that you need to consider when purchasing. The angler must choose power in accordance with the type, object and conditions of future fishing. The class of the selected gear and the characteristics of the bait are taken into account. It is advisable to select a wicker model for a spinning rod, looking not at the diameter in millimeters, but at the degree of its breaking load, which is indicated on the packaging.
On many options Japanese made Recently, the diameter is not indicated at all, but only Japanese sizes are available. The value of the most popular ones is from 0.2 to 1.5. On Japanese models belonging to the latest generation, there is a relatively accurate diameter value. And for other fishing lines of the same kind, their actual diameter is often indicated with an increase of several tenths or hundredths of a millimeter. If you set a goal, then it is quite possible to find two models that have the same diameter and breaking load, which will be significantly different.
In addition, you should definitely take into account that the value of the breaking load on the unit will certainly be less than the value written on the packaging. The values of the declared and actual given load very often do not coincide with each other. Discrepancies in diameter are more significant than these differences. For this reason, when purchasing such a fishing line, you should start from the breaking load in pounds (lb). 1 pound is 2.2 kg.
“Braids” with a load of 4-6 lb (1.8-2.7 kg) are suitable for catching small fish (weighing up to 300-400 g) from the shore. Fishing lines belonging to this class go well with light and ultra-light tackle. They can be used to catch other small-sized predatory fish using microjig baits, small wobblers and small spinner spoons. Options with a strength of 4-6 lb are suitable for fishing from a boat for perch only. Having a load of 8.1 Olb (3.5-4.5 kg), they are used for fishing from the shore for asp, chub, small pike, and ide in small reservoirs. Such braids are useful for catching pike not large sizes, perch and pike perch on a light shore jig. They are also used when fishing with castmaster for fish such as perch and asp.
Braided spinning line with a strength of 12-15 lb (5.4-6.8 kg) is used in the process of fishing from a boat for pike, pike perch and large-sized perch using jig baits belonging to the heavy and medium range, and wobblers, reaching a length of no more than 110 mm.
Braids with a strength value of 18-20 lb (8-9 kg) are used for fishing in increased complexity(for example, if in the selected area there is large number algae, driftwood or stones on the bottom) from a boat for perch, pike perch or pike using jig baits belonging to the heavy and medium range, as well as in the process of fishing with large wobblers reaching a length of more than 100 mm.
Braid for spinning for pike with a weight of over 20 lb (more than 9 kg) is used when fishing with jerkbaits and when fishing by trolling.
Unwinding
This is a relatively simple option. The most popular value is 150 m. The minimum permissible unwinding value for fishing with a spinning rod is 100 m (used in cases where the braid is rarely used and its loss during the season is minimal). There are also options for 125 m, 135 m, 200 m, 250 m, used for spinning fishing.
Cord type
There are three main groups of braided lines, differing in the type of fiber connection:
- braided cords are the most common, mostly soft and relatively stretchable cords, characterized by a good ratio of quality and cost;
- soldered through the use of heat treatment - rigid and inextensible fishing lines with a more rounded cross-sectional shape;
- sheath-type braids - have an almost circular cross-sectional shape (in such cords, the fibers are in a sheath made of a high-strength material).
Weave density
This parameter affects many characteristics of the braid: its true diameter, wear resistance and calibration along the entire length. Even the cheapest braided cord will have strength several times higher than any monofilament line. The more densely the cord fibers are woven, the higher its performance will be. The loose weave of the cord is easy to notice when choosing: the fibers of such a braided fishing line will delaminate if you try to squeeze or twist it. These braids are characterized by a predominantly flat cross-section and are very responsive under the influence of wind and water. In addition, loosely braided fishing line is highly susceptible to various damages.
Paint fastness
This parameter is not paramount, but also deserves attention. In some cases, when winding line onto a spool, anglers will notice noticeable paint residue on their hands after winding is completed. This indicates the unsatisfactory quality of the braid. In addition, a fishing line of this quality may generally become discolored after several uses (this applies mainly to the first 10 meters, which are subjected to the greatest load when landing fish).
Wear resistance
This parameter indicates the degree of preservation braided fishing line available characteristics during its use. Each such cord begins to wear out over time, loses its strength and frays. The most durable are the classic type cords, made of high-quality material, having a smooth and slippery surface and woven in the most dense manner. Loose classic and hard soldered cords wear out much faster with regular use and rarely last more than one season.
Braided fishing line for spinning: review of popular ones
Sensitive braided line with increased strength. It is well suited for medium-heavy spinning rods. The unwinding length of 150 m will allow it to be used for a long period. Woven quite tightly. It has a round cross-section and a slippery surface. You can use this option when catching fish such as pike perch and pike with jig baits weighing 10-50 g, as well as for twitching fishing with large wobblers. The stretch of this cord is minimal. Although the tensile strength may be less than the declared 6.8 kg, it is still well suited for the majority of cases. The diameter of this braid allows it to actively work with baits weighing from 10 g. The material from which the cord is made does not absorb water, i.e. it completely retains its qualities when working under water. Available in white and acid green.
Elastic, highly sensitive braided line, characterized by high weaving density and round diameter. It is characterized by ease of unwinding, high wear resistance and excellent strength indicators.
This braid typically does not have a tensile strength value in pounds, but rather a diameter of 0.15 mm and a tensile strength of 9 kg. This figure does not correspond to the indicated 10 lb; the true tensile strength of this model is approximately 15-16 lb. The actual diameter of this cord is not less than 0.23 mm. An excellent choice for medium-heavy spinning rods. Can cope well with shells and an abundance of driftwood. Suitable for jig fishing in conditions of an excessively cluttered bottom and an abundance of underwater vegetation. The unwinding length is 135 m. In most cases, such a model can withstand a couple of seasons.
An excellent option for serious fishing predatory fish. This model is quite durable, has high wear resistance, but less dense weaving than the previous ones. Almost does not become shaggy with active use. The actual diameter of such a braid is 0.25 mm, which differs from the declared 0.12 mm. The unwinding length is 100 m. It is used for feeder fishing, as well as for trolling and jig fishing in “strong” places. Provides the ability to unbend in case of “dead” hooks, which in turn allows you to save bait. Effectively “rescues” highly expensive wobblers from snags.
P-line Spectrex 0.23 mm, 15 lb
It differs significantly from the options discussed above in its increased level of sensitivity. It is also distinguished by ease of unwinding (136 m), high strength indicators and an adequate price. Its wear resistance is not very high, but this drawback is inherent in all cords made through the use of heat treatment. When using working part This braid begins to become shaggy over time. This does not affect the strength, but makes it a little difficult to use when fishing with baits that have a relatively low weight. If you use bait weighing over 10 g, fishing will take place without such inconveniences. The existing tensile strength of this model fully corresponds to the declared one, and the diameter is slightly less than specified. Well suited for fishing on a relatively uncluttered bottom, with bait weighing more than 10g.
This braided fishing line for spinning was able to show itself worthily in the process of twitching fishing with deep wobblers. The unwinding length of such a cord is 150 m. It fully corresponds to the specified characteristics, does not become shaggy when used, and has a good reach. This braided line differs in the following: for its production, a hybrid eight-strand material is used, consisting of 4 polyester fibers and 4 polyethylene fibers. Thanks to this feature, such a cord is wear-resistant and has a sinking property, helping to deepen deep wobblers.
Varivas Super Trout Advance Max Pe 0.148 mm, 11lb
This braided line for spinning rods belongs to the category of Japanese-made models that are distinguished by their impressive cost. It has a round cross-section and a slippery surface, and has the most durable weaving. This line is mainly used when fishing for chub with a wobbler in small bodies of water. In addition, such a cord can also be used for light pike fishing from the shore and in the process of catching asp in a wade using castmasters. The breaking strength of this model is approximately 8 lb and the diameter is exactly as specified.
One of the thinnest braided fishing lines for spinning. The unwinding length is 120 m. Can be used in combination with baits weighing from 1 to 9 g and ultra-light tackle. It features an ultra-dense weave and high abrasion resistance. Thanks to the slippery surface of the cord, it provides maximum reach. This spinning line is suitable for fishing sea fish small in size, living on rocky bottoms and belonging to the rockfish family. It wears out quite slowly, but the small diameter of the cord allows frequent breaks when snagged.
Varivas Lite Game Mebaru 0.4 mm, 8 lb
A worthy Japanese-made model, also designed for catching sea prey belonging to the “rockfish” family. It has a dense weave and a slippery surface. Used for microjig fishing for fish such as perch. The actual breaking load is approximately 3 kg, which makes it possible to use this braid not only when catching perch, but also when catching larger fish.
Beware of fakes
How to choose a spinning cord and not buy a fake? Most often counterfeited are such popular brands as Power Pro and Fire Line, the constant leaders in the number of counterfeits of which have continued to remain for quite a long time braided cords American made Power Pro. How to distinguish a fake from a high quality product? Power Pro originals are distinguished exclusively by odd diameters and are sold in plastic packaging, which must have a barcode on it. The package should contain an insert indicating the appropriate components for the specific model. The fishing line itself must be wound on a special bobbin, which allows for high-quality winding of the fishing line onto the spool.
In addition to standard fishing rods, manufacturers offer fishermen a huge selection of gear for each type of fishing. It also includes a variety of fishing line options - for summer or winter fishing, as well as common fishing lines.
Where to buy braided fishing line for fishing
This type of fishing thread can be purchased in the X-FISHING online store. We offer a large assortment of this type of high quality gear, which will become an integral accessory for successful fishing.
Peculiarities
This type of fishing line is a thin braided cord, the main parameters of which are:
- High breaking load compared to standard fishing line of the same diameter - ensures the strength and reliability of the product;
- Lack of stretchability;
- The diameter, or rather the thickness of the cord, since it is not perfectly round;
- Weaving method. The nuance here will be the number of threads and their thickness - usually there are from 3 to 8 pieces in a skein.
The advantage of such a fishing thread is its resistance to stretching, which is important for sharp and strong hooking.
It can also be used for ice fishing, as the braid combines the characteristics of thinness and maximum strength. It will be useful when hunting cautious and large fish. But there is a significant disadvantage - in severe frosts there is a possibility of the thread freezing.
Choosing a braided fishing line
It is better to start selecting this gear by discussing fishing conditions, since for long casts, in their absence, for light or heavy baits or overgrown reservoirs, there are different types of braided cords.
For example, this type of fishing line is perfect for jigging due to its zero elongation.
It is worth paying attention to the number of threads in the winding - the more there are and the thinner they are, the more difficult it is to weave them, and accordingly, the price will be higher. But the quality of such cords is not always the same. top level, so sometimes 5-6 threads in a high-quality binding are enough. It should be dense and strong, which will increase the strength of the cord and its casting distance. When paying attention to the color of the fishing line, it is worth remembering that its durability and brightness reduce the retention of tensile strength. And the special impregnation of the cord slightly adds diameter, but makes it denser and closer to a round shape. True, such coatings are not always durable.
Manufacturers
The fishing tackle market has many brands that offer similar products. Here are some of them:
- Zenag;
- Berkley;
- Gozen;
- Kureha;
- Power Eye;
- Spider;
- Black Hole;
- JigMaster;
- Daiwa;
- Power Pro;
- Sufix;
- Stinger;
- Toray;
- Stren;
- Pontoon 21;
- Shimano.
By choosing the right fishing line, you can get not only a successful catch, but also high quality gear for a long time.
The braid diameter indicated by the manufacturer on the spool is a very approximate value that may not correspond to the real one at all. After all, the same fishing line, even from premium brands, does not have a uniform thickness. The diameter of the braided cord is not a constant value along the entire length of the fishing line, but the value indicated on the spool is the average value of the diameter of the fishing line.
The problem also lies in the fact that it is almost impossible to accurately measure the diameter of the braid, and each cord manufacturer uses its own method for calculating it, based on the ratio of the mass of the material and other parameters of the multifilament fishing line.
Braid diameterWhat does the question mean: “what diameter of braid to choose” if it is not specified for what?
It means absolutely nothing without clarifying the parameters of the gear and fishing method. Moreover, if we talk about braid for spinning rods, for example, then the diameter of the braid can also fluctuate over a wide range. For spinning, ultralight is thin, delicate cords; for jig-spinning, it is much stronger, depending on the weight range of the baits used. What braid diameter should I choose in each specific case? Let's look at this in more detail, but first, a few facts about braid.
Facts about braid
Braid under a microscope What you need to know about braided fishing line:
- the braid has almost no stretch (zero stretch), which is very good for controlling the bait and registering a bite, but not so good for landing fish;
- braided cord is much stronger than any monofilament line (monofilament);
- depending on the type of weaving, multi-fiber thread can be round and flat in cross-section (round braid has less sail and sinks faster);
- braided fishing line, especially without impregnation, absorbs water, so it cannot be used in winter (with the exception of special cords and impregnated from freezing);
- Braided line very quickly cuts through low-quality rod rings;
- not all knots for regular fishing line are suitable for braided line (they have a lot of slip);
- Braided fishing line is more expensive than regular line, but it's worth it.
Diameter of braid for spinning
What diameter of braid should I choose for spinning? You can rant endlessly on this topic, saying that not everything is so simple here and “blah blah blah,” but we will try to be more specific.
The diameter of the braid for spinning depends on the following parameters:
- test your spinning rod and reel class;
- weight of the baits used.
- the size of the expected fish you are going to catch;
When it comes to choosing a braided fishing line for spinning, it should be taken into account that it is two or more times stronger than regular fishing line. Therefore, if you used monofilament with a diameter of 0.3 mm, you should choose a braid with a thickness of no more than 0.15 mm. You will be surprised how far your bait will fly.
Spinning rod for pike
“What kind of braid for pike,” is what they often ask in stores.
Braid for pike? Are you serious? Okay, let's once again draw an analogy with a regular fishing line. If you previously caught pike up to 3-5 kg and monofilament with a diameter of 0.3 mm was enough for you, then braid with a thickness of 0.08 - 0.1 mm can hold this weight. Braid with a diameter of only 0.1 mm will definitely suit pike up to 5 kilograms.
Thicker braid will be able to withstand more, but with thickness the casting distance decreases and when hooked it is very difficult to break. You should also not get carried away with excessive thinning, since the thinner the braid, the faster it wears out and the less service it has. A compromise needs to be found here.
For catching pike up to 5 kg, a braided line with a diameter of wide range- from 0.06 mm and thicker. For light baits and ultralight spinning rods we use up to 0.08 mm, for a medium-weight jig, braid up to 0.14 mm is suitable, for a heavy jig spinning rod you should choose from 0.14 to 0.18 mm. So we figured out what kind of braiding is needed for pike.
Conclusion: the diameter of a suitable braid for spinning is no longer tied to the type and size of the fish, but to the power of the rod and the weight of the baits used. No matter what you will be catching - perch, pike, pike perch or other fish, it is important that the braided cord matches the power of the tackle as a whole (spinning rod + reel + bait).
Braided lines from different manufacturers can differ significantly in breaking load for the same diameter, so this also needs to be taken into account.
Braided fishing lines for spinning - video
If you know very little or nothing about braided fishing lines and want to learn more, we recommend watching the film by the Shcherbakov brothers dedicated to choosing a braided fishing line for a spinning rod and about braided fishing lines in general:
Diameter of braid for feeder
Everything that we said about braided line for spinning is generally true when choosing a braided line for feeder gear. Only instead of the power of spinning rods, you should take into account the power of the feeder gear and the weight of the feeders used. Many parameters of braided fishing line that are important in a spinning rod are not taken into account for the feeder.
The main thing is that the fishing line can withstand the critical load that occurs when casting the feeder.
To throw a feeder weighing 100 grams over 50-60 meters, the peak load for the cord is no more than 5 kg, and for a 150 gram load - no more than 7 kg. These are approximate figures that you can use as a guide when choosing a cord based on the test breaking load.
- For fishing without current with feeders up to 30 grams, a cord with a diameter of 0.05 mm with a shock leader is suitable.
- For fishing in the current with feeders up to 150 grams - braid with a diameter of 0.17 mm.
How to measure the diameter of braid
Measuring the diameter of the braid is very difficult Measuring the diameter of a braided fishing line is not as simple a task as it might seem at first glance, but it can almost be solved.
Why can't you accurately measure the diameter of braided fishing line? The thing is that, unlike monofilament, a braided cord consists of many ultra-thin threads connected by a special weave with or without impregnation. Even with slight compression of the cord with a measuring tool (micrometer), we get incorrect measurements at the output. In addition, the braid may initially have a flat cross-section rather than a round one.
It would seem: if we know the number of threads in the braid, what could be simpler than taking and “adding” the diameters of all the threads and getting the total diameter of the braided cord? Theoretically, knowing the cross-sectional area of each thread in the cord, it is possible to determine the overall diameter of the cord, but the problem is that the diameter of each thread differs significantly from each other and is different along the entire length. And moreover: who said that the number of micro-threads is generally known and that it is a constant value? So, this measurement method is also very inaccurate.
So how do you measure the diameter of a braided fishing line?
We can use a little trick: if we tie a regular single knot on a braided fishing line and tighten it, its density will allow us to use a micrometer and find out the size of the knot. If you tie several knots on one fishing line, their size will differ from each other within the limits of error. Thus, we can take the thickness of the knot as the conditional size of the thickness of the braided line.
If we divide the thickness of the knot by two, we get the diameter of the braided thread close to the real one.
It should be understood that this method does not give us absolutely correct result, but allows you to compare the thickness of different braided lines with sufficient accuracy. Having a “standard” of braided thread in hand, let’s assume 0.15 mm in diameter, and knowing the exact size simple node on it, we get the opportunity to compare.
The Shcherbakov brothers even made a video about this.
I am already familiar with Bobbing products. (I have several braids of different diameters) And I even reviewed So when I saw a discount on this braid at a sale, 300 meters long for just over 9 dollars, I bought it without hesitation.
This was back in the summer. The parcel with the braided line arrived quite quickly, but it remained stuck in my fishing box without any use.
But with the arrival of winter, I found a use for it. And I liked this application. But first things first.
The braid came in a rather rickety box. Don't know. Either the store already sent one, or it got hurt on the way: 
Inside the reel with braid: 
More precisely, three coils connected together, with a wound braid of 100 meters each: 
The peculiarity of this braid is its color. Changing every meter. As a result, 300 meters away we have a beautiful rainbow: 
This coloring was made for a reason. It is needed to control the length of the braid. Convenient for trolling fishing and when casting a spinning rod.
The braid itself is quite thin. I don’t have anything to measure its thickness, so I can’t say for sure whether it’s 0.12mm or not: 
I liked the quality. The braid is not shaggy, visually it has the same thickness along its entire length.
It is really very resistant to tearing. I couldn't tear it apart with just my hands. She begins to cut her fingers, but does not want to break. This gives hope that there will be no problems with not very large specimens of perch and pike (which predominate in our area). They won't gnaw or bite.
This time I decided to use braided wire for the vents. Many fishermen really love the first ice of winter. And I'm no exception. At this time, you can catch quite a lot of pike that are still actively feeding.
Therefore, for testing, I bought two zherlitsa offline: 
And he equipped them with the observable wickerwork: 
Since the braid is very strong, you have to cut it with the following tool: 
I didn’t reel in all 300 meters. I limited myself to only 1 reel out of three. This is approximately 50 meters for each vent: 
Although in fact I did not reel exactly, and most likely it turned out to be about 30 and 70 meters on two reels. 
I went fishing last weekend. And as you know, most often fishermen get a bite either yesterday or tomorrow. But today it’s not biting. My trip, too, was not very successful in terms of catch. I caught several fish on the balancer: 
And a very small pike, about 600 grams, which pecked precisely on the monofilament rod: 
(I had 8 vents installed) But in defense of my fishing sense is the fact that it was one single pike among a dozen fishermen who were fishing nearby.
Based on one fishing trip, I can already draw one conclusion in favor of braided line: it is much better visible on white ice, unlike fishing line. This makes it easier to find and wind up. I will definitely now put wicker on the vents. Fortunately, I have it in reserve.
But I’ll probably use the remaining 200 meters of this particular braid not on the girder, but on the recently arrived new PisciFun Torrent multiplier reel.
That's all. I'm finishing the review. There won't be any special conclusions. The braid is good, the price is comparable to offline offers, but at least I have already encountered the Bobbing company, and it suits me. I probably won't recommend it. Not because it’s bad, but because there are a lot of fishermen here (judging by the comments on previous reviews) and everyone has their own preferences. I just told you about mine. Therefore, everyone has no scales on their tail. And good catches.
UPS
- City: Barnaul
- I can be useful: hypothetically...
Once upon a time, in a past life, I did a similar “research”, but purely for myself and on the forum I mentioned it tangentially... Today I decided to open a profile thread regarding the question in the title. Since I have little practical experience, I will not talk about the “flight” qualities of this or that “cord”, their wear resistance, noise, etc., etc.... we will only talk about the breaking load. However, if anyone has something to add (constructively, without flooding) - I will be glad.
So, "cord" Cormoran Corastrong PE 8-Braid
Diameter: 0.14 mm.
Test: 8.90 kg.
Length: 135 m.
Price (with discount) less than 900 rubles.
Purchased to replace SALMO ELITE BRAID, which served me faithfully for more than two seasons and finally ended... Inside the box there is a reel:
Here's what managers write about her: Cormoran Corastrong PE 8-Braid is an updated series of Corastrong cords. The new generation received a core made of Coramid material, borrowed from the Cormoran catfish program. The cord turned out to be even more durable compared to its predecessor and less stretchable. The braid has excellent throwing characteristics due to its very smooth and slippery coating. The cord resists abrasive loads, ultraviolet radiation and does not absorb water.
To the touch, the line is smooth, I think it will be quieter than SALMO, and a little oval (purely subjective feeling), not as stiff as, say, Power Pro, but still tougher than the same SALMO.
I do not have an authorized instrument and do not claim to be the ultimate truth. I will measure the tensile load using this simple device:
As you might guess, a piece of fishing line about 30 cm long will be attached to the steelyard hook on one side and the handle axis on the other. When testing a “knotless” connection, the fishing line will simply be wound tightly (to avoid slipping) on both sides; when testing the strength with one or another knot, a knot will be tied on the steelyard hook *. Each connection type is tested three times and the results show the average value.
So, the results so far:
1. Without hub connection: 5.45 kg.
2. Palomar node **:
4.80 kg.
4.90 kg.
3. "Blind" loop: 3.30 kg.
4. Clinch knot:
It slips (!!) 5 revolutions normally, already at 400 grams! 5 revolutions "improved" - at 1.8 kg., 6 revolutions "improved" - 2.2 kg.
(I don’t see any point in experimenting further with this node)
5. Double Clinch Knot:
It started to slip by 2.8 kg, but I left the second end long enough, and it broke at 3.40 kg, at the knot.
* I checked again at the Palomar node, the presence of an improvised “leash” made from a paper clip (I was too lazy to go get the leash, let’s assume that it’s not a leash, but a swivel, let’s say, its diameter is exactly the same as that of a paper clip)) to which a fishing line is attached, on had no effect on the results. As soon as I get to the pier, I’ll check it again, with a real leash.
I can’t imagine how the manufacturer obtained the declared value of 8.9 kg...
Actual tensile strength in % of the declared one (8.9 kg), for each of the tested units:
1. "Knotless" installation - 61%
2. Palomar knot - 54%
2.1. Palomar knot with milking loop - 55%
3. "Blind" loop - 37%
4. Clinch reinforced knot (6 turns) - does not hold
5. Double “Clinch” knot (6 turns) - 38%
This is a very disappointing result, I promise to conduct a repeat study in the off-season, taking into account possible errors(first pancake).
PS Draft version, I will make adjustments in the process, if I don’t forget, tomorrow I’ll take the camera home and make a couple of videos - for clarity
ZZY Questions to all forum members: Which nodes do you use most often? I'll check them out. Well, in general, maybe. What am I doing wrong? Please speak out, then we’ll ask the moderators to remove the unnecessary stuff...
ZZY I would like to test several different “cords” in one thread (maybe several dozen))), in connection with which I am contacting all fishing stores, if this is interesting, write in a personal message, we’ll discuss))
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
New ones, I’ll duplicate them here, then when cleaning I’ll ask you to remove them:
2.1. Palomar knot with a milking loop (i.e. the double wattle was threaded into the loop twice, after which the knot was knitted and fixed): 4.90 kg. (in fact, the result is within the margin of error and makes a lot of sense; I don’t see how to knit a double loop specifically for this “wattle”)
* I checked again at the Palomar node, the presence of an improvised “leash” made from a paper clip (I was too lazy to go get the leash, let’s assume that it’s not a leash, but a swivel, let’s say, its diameter is exactly the same as that of a paper clip)) to which a fishing line is attached, on the results had no effect. As soon as there is a road to the pier, I’ll check it again, this time with a real leash.
** At the Palomar unit, an experiment was carried out with a piece of “wattle fence” of greater length, a piece of 1.8 m was taken and immediately before taking measurements (i.e. already on the “rack”) it was moistened with water using a sponge, the distance between the axis was which the fishing line was wound with a “leash” placed on the steelyard - about 1.2 m, after the measurement, the piece of fishing line was unrolled and a second measurement was taken, the third was carried out on a new piece. The result obtained in three dimensions: 4.88; 4.92; 4.48 kg. Believe it or not)) Thus, for myself at least, I have decided that there is no need to wet the entire segment before taking measurements, as well as to take measurements on a line of greater length (a meter or more).
PS Soon there will be data on Proshka...
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
So, my next test subject: Power Pro 0.19 mm. The declared breaking load is 13 kg, the price is the same, about 900 rubles.
By tradition, we will give the floor to the managers: PowerPro is the optimal combination modern technologies and many years of experience and knowledge. PowerPro cords are made using high-strength Spectra Fiber braided fiber and new technology Enhanced Body Technology, resulting in an original, elastic, round in diameter and highly sensitive “braid”. Fine fiber, dense weaving and additional coating ensure the highest strength of PowerPro braids. The unique combination of materials combined with EBT (Enhanced Body Technology) technology gives us the following advantages:
more round diameter;
high elasticity;
increased abrasion resistance;
lack of extensibility and “memory”;
high knot strength;
compliance with the specified diameters.
One way or another, to the touch the “cord” is stiffer than Cormoran Corastrong PE 8-Braid, more round in cross-section, and not so smooth (you can clearly feel the braiding, I think it will make more noise), the color is my favorite)):
I was not too lazy to make a clasp for “knotless” installation, this time, everything was fair...
1. “Knotless” installation: 9.10 kg.
I promised a video for clarity:
As a bonus: found confirmation of the words of the Last Right-hand Driver, on the new “fence” 3 times out of 3 there was a break - clearly on the clasp. And in general, the “knotless” design impressed me, but I’ll bend my own clasps))
2. Palomar node: 
I was pleased (!) with 8.35 kg.
3. "Blind" loop: 7.0 kg.
Brief IMHO: the fishing line looks much more cheerful against the background of Cormoran Corastrong PE 8-Braid, the point is not in greater strength (this is understandable, it is stated to be much greater), but in the fact that the spread of the load that the fishing line can withstand does not depend so much on the type of knot .
Actual tensile strength in % of the declared one (13 kg), for each of the tested units:
1. "Knotless" installation - 70%
2. Palomar knot - 64%
3. "Blind" loop - 54%
4. Knot “Reinforced Clinch” (6 turns with the free end of the fishing line melted) - 70%
5. Double Clinch knot (6 turns) - 64%
PS I’ll leave a piece of Cormoran Corastrong PE 8-Braid, I’ll try it in the dead of winter, I have a suspicion that I was in a hurry the first time... I loaded this line, with a load close to the maximum, much more slowly... maybe the results will change a little...
ZZY Thank you for the sample provided.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
Like an announcement: TADAAAAAM!!!
Moreover, “Proshka” 0.10 is available in two versions: “by weight” (large reel) and a real “American” on a reel. It will be a glorious battle
PS For the samples provided, thanks to Andrey aka Rey and Stepanych.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
As they say in the city clinic: “Next!” "Unitika" Eging Super PE 0.6 - 150 meters per reel. In the city, it seems, such a “cord” is no longer sold, and the price is not the most reasonable, but at one time it was widely known in narrow circles, and even I, a person far from advanced trends, heard about “Unitika”... Besides This is the first relatively thin fishing line that fell into my hands...
What can you write to sell)): The best, according to leading Russian fishermen, and one of the thinnest braids on the market. The ideal tight weave combined with amazing softness and smoothness make this line the best for casting with light lures. Compared to standard cords, the bait flies about 20% further with it, which makes this braid indispensable for ultralight fishing.
Diameter: 0.128 mm.
Unwinding: 150 m.
Breaking load: 4 kg.
Breaking load: 8 lb
Here let me insert my comment*... I don’t know who Lenin is here, but it turns out that 8 lb is 3.6 kg... Since my measurements are in kg, it says 4 on the pack, I’ll count that way.
Color: Multicolor (beautiful))
Price: ~ 2300 rub.
To the touch, the “cord” is actually soft (although it is difficult to imagine a rigid fishing line of this diameter), slippery (although the “weaving” is felt) and completely round in cross-section. I never completed the microscope for the child, the attempt to take a photo was a fiasco (the poor quality of the plastic lens is to blame for this, nevertheless, experiments continue), but judging by what I saw, the weave is very dense, and the diameter is quite uniform...
I described the test methodology above and also demonstrated the video, so let’s go straight to the results:
1. “Knotless” installation: 3.55 (!) kg.
2. Palomar node: 
- slips
2.1. Palomar knot with double loop - 3.00 kg.
3. "Blind" loop: 1.75 kg.
(with cauterized free end).
About 0.7 kg. - the knot begins to slip, after which it rests on the resulting “bump” and holds an average of up to 2.6 kg.
I didn’t use a lighter to burn it, the knot hardly tries to slip, but the gap on average is only 1.95 kg. (?) I don’t understand what is causing this failure...
Brief IMHO: As great as the result is on a “knotless” installation, it is just as disastrous on the “Clinch” and especially on the “double Clinch”... There is an opinion that this line is quite delicate, sensitive to injury and not very wear-resistant... as far as this is concerned True, I don’t presume to judge, but if this is so, perhaps this is precisely what explains such a result on “complex” nodes that have many kinks... I don’t pretend to be true.))
Actual tensile strength in % of the declared one (4 kg.), for each of the tested units (*values in parentheses are based on the calculation of 8 lb = 3.6 kg.):
1. “Knotless” installation - 89 (98)% (!!)
2. Palomar knot - slips
2.1.
Palomar knot with double loop - 75 (83)%
3. "Blind" loop - 44 (49)%
4. Clinch reinforced knot (6 turns with the free end of the fishing line melted) - 65 (72)%
5. Double “Clinch” knot (6 turns) - 49 (54)%
ZZY Thanks to Andrey aka for the sample provided.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
Rey
Rey
- City: Barnaul
There is an opinion that this fishing line is quite delicate and sensitive to injury.That’s right, if you shuffle the wood, it tears at the site of injury too easily
- Nik (Uncle Kolya) and UPS like it
I don’t like fish... if I catch it, I’ll drown it!
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
American power!
I really wanted to compare the two “Proshkas” that fell into my hands... but this “rope” gave me no rest... Cajun Line Cajun Braid from CAJUN GUARD... 300 YD(275 m.) on a reel, 0.279 mm. And 30lb or 13.6 kg. (!) declared tensile load! I understand that fishing line is rare in our area... but I couldn’t resist checking it first...)
Also pink)))
Unfortunately, you can’t buy this fishing line here, but if you really want, you can order it from the bourgeoisie, if I’m not mistaken, its price is about $31... I didn’t find any special laudatory odes from the manufacturer... for some reason the main emphasis is on for its gorgeous color (well, of course) and the fact that it does not fade, does not fade, in general, it looks great until old age....
To the touch the line is quite rigid with excellent “memory”, round, the weaving is felt clearly, I think it will be quite noisy when casting... Very powerful))) it looks really convincing...
Now the reason why the test is delayed a little... Knotless, rack, turnover, two, three... 4 kg, 5.. 6.. .. .. 12... 13... 14 (!).. . 15 (?)... 16... (!!!) - 16,3 ! BAM!!! Break!
The homemade clasp made from a paper clip has lost its former shape... Involuntarily, I remembered Andrey’s doubts - “..will the rack hold up?..”))) It did... but the clasp will have to be remade... 16.3 (!) guys.. .at the stated 13.6! I love America!)))
So, the results:
1. “Knotless” installation: - 15.2 (!) kg. Repeat yesterday's record of 16.3 kg. It didn’t work out (the minimum value out of 5 attempts was 14.2), however, the average result is impressive.
2. Palomar node: 
- 14.2 (!) kg. Again more than stated!
(what is it written on American currency?)
3. “Blind” loop: slips, with a cauterized free end, holds 12.6 kg.
4. Clinch reinforced knot (6 turns): 
14.05 kg.
(I didn’t burn anything with a lighter and it holds up just fine)
5. Double Clinch knot (6 turns): 
10.9 kg
. (extremely unstable result, spread across 5 measurements is 2.4 (!) kg.)
Brief IMHO: Super result on “knotless” editing, Palomar and Clinch... Failure (well, like a failure, more than good result compared to previous test subjects) in the double Clinch, in my opinion, is due to the complexity of the knot, there are too many turns and bends, the knot is tightened during the testing process (it was not possible to tighten it completely by hand more than once), apparently it “burns” during the slipping process. In general, this “rope” does not need such a complex knot.)
Actual tensile strength in % of the declared one (13.6 kg.), for each of the tested units :
1. “Knotless” installation - 112% (!)
2. Palomar knot - 104%
3. "Blind" loop - 93%
4. Clinch reinforced knot - 103%
5. Double “Clinch” knot (6 turns) - 80%
ZZY Thanks to Andrey aka Rey for the sample provided.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
As it turned out, I won’t be able to compare the two “Proshki” (((It’s all about my carelessness, it turns out that the one “by weight” is 0.10 mm, and the one on the reel is 10 lb ((such garbage...
But let’s not despair, and will be the first to go on the rack: Power Pro , 0.10 mm. from a large reel (1370 m), declared breaking load 5 kg, price - 5 rubles / meter.
I received it in this form:
Well, you didn’t think that Stepanych would rewind 130 meters for me? stealing
This time I will not rewrite the description from the Internet, because not so long ago “Proshka” was already on the test, so there is no point in duplicating it.
From myself: the “cord” is quite rigid (in comparison with Cormoran or Unitika), round, quite slippery (although the “weaving” is felt).
The test of this fishing line has unfortunately been postponed for an indefinite time... The fact is that I wound the entire piece onto the axle, deciding that I would gradually unwind it, cutting off 20 at a time, and knit a new knot... The first was the “knotless”: first attempt: 3.75 kg. - break near the fastener, second attempt: 4.15 and the fishing line breaks near the axis on which it is wound, while crashing into the winding so that it is impossible to pull it out from there... i.e. I couldn’t even find the end... I’ll have to stupidly cut it off with a knife... Things like that. It’s not clear what caused the breakage not at the fastener, it’s the first time this happened... Just in case, I will no longer reel in the whole line at once, but cut it into pieces, as I did before...
I won’t delete the post, as soon as such fishing line appears, I will continue...
PS Thanks to Stepanych for the sample provided.
ZZY Come on!)))
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
Next test subject: BULLIT BRAID 0.16 mm. from Allvega - 135 meters per reel.
Manufacturer: Allvega
Diameter(mm): 0.16
Unwinding(m): 135
Breaking load(kg): 10.2
Color: dark green
Price: 620 rub. (without discount) - very budget-friendly.
"Bream" from "Fishprofi")): When creating the BULLIT BRAID braided fishing line, we used latest achievements science and technology. Thanks to this, the manufacturer was able to achieve excellent performance. And achieve the best price-quality ratio today.
Key Features:
High breaking load, 2.5-3 times higher than monofilament of the same diameter.
- Data on breaking load and diameter are correct.
- Low elongation, high sensitivity.
- Thanks to the smooth surface, friction and windage are reduced and the casting distance and line life are increased.
- High wear resistance. Uniform wear, no “terry” effect
- Does not absorb water, comfortable use at sub-zero temperatures is possible.
- Minimal elongation, no memory, excellent knot strength.
- Excellent combination of price and quality.
In the photo there is a fishing line next to a leash-string from "Leader" UL (if I'm not mistaken, 0.2 mm - correct?)
The “cord” is very soft to the touch, the weave is clearly defined (not the quietest I think) and not very dense, there is practically no “memory”, it is round in cross-section, in general it is very similar to ordinary sewing thread)), the diameter is only a little in my opinion underestimated (if "by eye"). I liked it, if it doesn’t disappoint me in the test, I’ll probably consider it as an option for purchase.
Well, the results:
1. “Knotless” installation: - 6.70 kg.
2. Palomar node: 
- 5.3 kg.
3. "Blind" loop: 4.6 kg. but it slips mercilessly... it is fixed due to the rather long (~ 4 cm) free end.
4. Clinch reinforced knot (6 turns): 
- 4.80 kg.
(I didn’t burn anything, the attempt to “slide” was one of 4, and it ended quite quickly)
5. Double Clinch knot (6 turns): 
- 5.45 kg.
Brief IMHO: This is a mediocre result, except that it’s soft (but that’s what I personally like), this specimen can’t boast of anything... the result is close to, but a third cheaper...
Actual tensile strength in % of the declared one (10.2 kg), for each of the tested units:
1. "Knotless" installation - 66%
2. Palomar knot - 52%
3. "Blind" loop - 45%
4. Clinch reinforced knot (6 turns) - 47%
5. Double “Clinch” knot (6 turns) - 53%
PS Thanks to the store "" and to Vladimir Stepanovich personally for the sample provided.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
Well... after a short technical break, let's continue... Meet: Fire Line Exceed 0.12mm from Berkley - 110 meters per spool.
Manufacturer: Berkley
Diameter: 0.12 mm.
Unwinding: 110 m.
Breaking load: 6.8 kg.
Color: green (or yellow... even though I have color perception...)
Price: 640 rub. (without discount) - very budget-friendly.
Braided cords of the new FireLine Tournament Exceed PE and Fireline Tournament Exceed Crystal series are made from advanced Micro Dyneema fibers based on high-modulus polyethylene (PE), which has significantly increased their strength and wear resistance. The quality of the color coating has also been significantly improved, thanks to which the cords retain their color longer during fishing trips. This modern braided cord for spinning rods and feeders meets all cutting-edge standards and meets all the requirements put forward by sports fishermen. The diameter of the braided line has been reduced, which improves casting distance and provides even greater sensitivity when fishing fishing tackle, be it a wobbler, a spinner or an oscillating spoon. Spinning anglers using jig tackle will appreciate the FireLine Tournament Exceed braided line, which fully conveys all the unevenness of the bottom surface and the slightest bite.
Blablablabla....
In the photo there is a fishing line next to a leash-string from "Leader" UL (if I'm not mistaken, 0.2 mm - correct?)
To the touch the “cord” is very hard, with excellent “memory”, smooth, slippery, but I wouldn’t exactly call it round, the weaving is not pronounced, and should not make noise when casting. I don’t like hard “threads”, this is personal, so I will refrain from subjective assessments, especially since everything is just beginning...
Here's what I got:
1. “Knotless” installation: - 5.5 kg.
2. Palomar node: 
- 4.2 kg.
3. "Blind" loop: 2.55 kg.
4. Clinch reinforced knot (6 turns): 
- 3.25 kg. (I didn’t burn anything, the attempt to “slide” was one of 4, and it ended quite quickly)
5. Double Clinch knot (6 turns): 
- 2.45 kg. (and it starts to slip about 2x, about 5-10 mm. Then, under a slightly increasing load, it breaks...)
Brief IMHO: This is a mediocre result, not bad on the “knotless”, quite tolerable on the “Palamar” and frankly a disastrous result on the “double Clinch”. Taking into account the fact that I don’t like hard “wattle fence”, I definitely won’t buy it for myself...)
Actual tensile strength in % of the declared one (6.8 kg), for each of the tested units:
1. "Knotless" installation - 81%
2. Palomar knot - 62%
3. "Blind" loop - 38%
4. Clinch reinforced knot (6 turns) - 48%
5. Double “Clinch” knot (6 turns) - 36%
PS Thanks to the store "" and to Vladimir Stepanovich personally for the sample provided.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
Afterwards, two wishes and suggestions. If anyone has a new “wattle fence” (not yet put on, or the remainder does not fit on the reel), you don’t mind 2-3 meters for “experiments” and are curious to know what I can do with it)) - write in a personal message. And secondly, if you have a desire to check some particular fishing line and it will be interesting not just to one, but to say five to ten forum members - write, we’ll try to find one... Well, in general, comments, suggestions, wishes - write.
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
"...If, all other things being equal, you forget about the numbers indicated on the packaging, take the same sample and conduct a “bottle” test and the correct one, based on the test results you will get different data. Probably this paragraph is the essence of all that has been written above. .."
I’m not even trying to argue with this, because I absolutely agree, I’ll repeat it again (it’s probably worth making some kind of preface so that those reading the thread don’t have the desire to explain to me every time that my results are not entirely correct))):
1. I know that the test that I conduct has a lot of shortcomings and its results do not correspond to laboratory tests, which is why I do not claim the truth. However, when conducting tests, I try to follow a number of rules that, in my opinion, allow (as far as possible at home) to get the most accurate and stable results possible, namely: I try to knit the knots the same way (I don’t try that when fishing)) , I try to increase the load on the fishing line evenly, simultaneously controlling the speed of rotation of the handle and the increase in values on the steelyard (here is, of course, the weakest point, because it is extremely difficult to do this), each time I take a new piece of “wattle fence”, of course, twisting of the fishing line is excluded (unlike “ bottle test, blown to smithereens in this article)).
2. The main task that I set for myself was to determine how much the data on the breaking load declared by the manufacturer differed in % from the results I received for different fishing lines and knots. Since the test conditions are the same for all fishing lines, I am inclined to think that the ratio will remain unchanged, even when testing under conditions close to laboratory ones, the threshold value will simply shift closer to that declared by the manufacturer.
3. At a certain stage, a table will be compiled in which the received data will be entered: Brand/model of fishing line and the breaking load declared by the manufacturer and the value obtained for each of the tested nodes. The results obtained will allow us to draw several conclusions: which fishing line is not worth buying at all)), and which of the knots is better to use on this or that fishing line (and which one should not be used at all... I, for example, noticed that a significant number of novice fishermen really like " blind" loop... it’s easy to knit, I’ve used it myself, those who have been fishing for a long time don’t use it almost at all, but here’s why - it’s clear from the tests that it’s almost always the saddest result).
Somehow))
I’m selling a garage at the BMK pier, PM me with questions, phone number in profile.
UPS
UPS
- City: Barnaul
- I can be useful: hypothetically...
