How to attach a boilie to a fishing hook. Catching carp with boilies How to tie a hook under a boilie

Boilies as bait are very popular among fishermen and have taken a strong leading place among baits for this fish. High-quality boilies contain the right amount of plant and animal proteins and have a smell that attracts fish.

Such bait is difficult to soak in water and is easy to attach to a hook. Not all fishermen think about the composition and effectiveness of boilies. Translated from English, this word means “to cook.”

During preparation, this bait undergoes a certain heat treatment. The shape of the boilies is spherical, with a diameter of 0.5-3.0 cm.

It consists of various mixtures of different types of flour, cereals, bran cake and other components, substances that help create an adhesive base - starch, gelatin and flavorings.

Types of boilies

Boilies purchased in a store and made independently are considered:

• bait
• dexterous

They have the same basis, but flavorings in bait balls it has a lower concentration.

Boilies are also characterized by different buoyancy, they are:

• drowning
• floating

Even during manufacturing, the nozzle receives one of these characteristics. To make sinking boilies, after cooking they are placed in the freezer or boiled for a long time.

To make it sink better, you can carry out both procedures. The bait will be even harder and will lie on the bottom until the fish notices it.

Floating ones are made using a microwave. Such balls become lighter and fluffier than sinking ones. Due to this structure, they manage to float on the surface of the reservoir. At the same time, they fall apart faster for the same reason.

There are also differences in size among boilies. Carp fish devour baits with a diameter of more than 1 centimeter.

Thanks to this size, small fish are cut off, and large individuals have a greater chance of eating the bait made for them. For nylon fish, fishermen have derived basic color preferences from fishing experience.

They give preference in bait colors:

• red
• purple
• yellow

The choice of boilie brightness depends on how clear the water is in the pond and the condition of the bottom surface. The approach here is this: use dark balls on light soil; in muddy water, bright boilies are more suitable and visible.

Floating

It has been noticed that mostly not very large fish prefer floating baits. Obviously, large and cautious individuals do not inspire confidence in food that is not very naturally located on the water.

Floating balls are often complemented by sinking balls to create a neutral bait suspended in the water.

The production of such a nozzle in a combined form is an order of magnitude easier than creating a neutral composition of the balls during preparation and making changes to the ratio of the components of the base composition.

When suspended, the neutral bait looks raised at a distance from the bottom, and the hook lies on the bottom surface. This bait does not get lost in the silt if the rig, sinker and leader length are chosen correctly.

Having no buoyancy, it is easier for it to get into the mouth of a fish even when there is not a strong bite from a not very active carp.

When using additional weight, a floating boilie is often used as a bait with neutral buoyancy. Recently, fluorescent-type boilies have been produced, which also fuel the fish’s interest in the bait visually.

Drowning

Such boilies are used as bait and groundbait. Especially for carp, which lives and feeds on the bottom. Sinking balls contain more components that are more attractive to fish.

In order to get a sinking boilie, it must be thoroughly boiled or frozen after forming the balls.

You can combine both manipulations, and you will be able to achieve a good solid base that will lie on the bottom for a long time and has a better chance of attracting the attention of bottom-dwelling fish.

How to attach boilies so that they do not fall apart when casting and fishing in the current?

Boilies are quite fragile and can crack when baited on a thick hook wire. And already during casting, while still in flight, the boilie ball will fall off. So we need to make sure that this doesn’t happen.

One of the most common methods for attaching boilies to hooks is hair rigging.

For this simple way You need a thin fishing line that is attached to a hook.

The bait is threaded directly onto it. A fishing line with a loop is passed through a thin-diameter through hole made with a drill or needle.

The boilie ball is very fragile, so you need to do everything as carefully and carefully as possible. A wire or match stopper is inserted into this drawn loop.

The second edge of the fishing line is tightly tied to the hook with any knot. That's all the work of planting boilies.

When baited correctly, the bait should be directly behind the hook.

When biting, the fish pulls in the bait using its lips. She does not notice any danger and calmly grabs the boilie, which she will no longer be able to spit out.

The hook should have already pierced the soft fabric and caught firmly in it. It turns out to be a spontaneous hooking. One or several boilies can be attached to the hook.

They are also threaded through the fishing line and tied. The bait looks appetizing when hanging like a garland when bottom fishing.

Cooking boilies

To make a floating boilie, the easiest way is to buy bait and make these balls from it.

You need to take:

• Carp bait – 1-2 packets
• Raw egg
• Dishes for mixing and making dough
• Container for boiling balls
• Cutting board and knife
• Various additives and flavorings as desired

Floating boilies are made as follows:

1. Add bait in portions to a bowl with a broken raw egg while stirring. The composition should not ultimately stick to your hands.
2. Depending on the size of the fish to be fished for, boilies of the appropriate size and shape are created. The dough is rolled out on a board and cut into thin strips from which balls are formed.
3. You need to cook in boiling water until the balls float.
4. The water is drained and the finished boilies are cooled.
5. Drying can be done in the microwave or oven. The main thing is not to overdry.
6. The correctness of the finished boilies is checked in water. If they begin to float up smoothly, they were made correctly.
7. Adding flavors is carried out immediately before fishing and depending on the fishing season. To do this, the balls need to be immersed in flavoring. You can use a special spray for different fish and with a variety of colors.

Various purchased liquids are used as flavoring agents, in the following proportion: per 1 kg of dry matter of the bait being manufactured, from 3 to 10 ml of flavoring agent.

Spices and spices can also be used to flavor boilies.

Such substances may be:

• cinnamon – 15 g per 1 kg of dry composition
• ground red pepper – 1 tbsp. For 1 kg of dough
• crushed anise seeds or oil

Dry flavors are added to the dry mixture, liquid flavors are mixed with the raw egg.

When making bait yourself, you need to make boilie options that differ in buoyancy properties, size, color and smell, so that during fishing you can choose the most acceptable one from the existing options.

KNOTLESS KNOT

This knot makes it possible to set the desired distance between the nozzle and the bend of the hook. Some anglers prefer further distances, others closer.

There is no specific requirement here, but still this distance should not be very large, since the hook will not immediately enter the carp’s mouth. The side closest to the hook should be 1 inch before touching it.

The meaning of the “hair” rig is in the separate arrangement of the hook and the nozzle. When fishing for carp or other fish of this family with teeth located in the back of the throat, it is most likely to get caught on the hook of the hair rig.

If the hook is in the bait, the chances of catching carp are reduced.

Bandage tape

In order for the nozzle to be pressed more tightly into the hook, you need to use a bandage tape or bandage thread. The tape is made of latex. It is attached to a hook or a special Dring ring.

It is also attached to the shank of the hook. The bandage tape is passed through the center of the floating boilie using a needle or stopper.

Bandage thread

A bandage thread is also used to tie the boilie to the Dring hook or ring. Use a needle to thread the ribbon through the ring and make a knot. Next, you need to tighten it and thread the ball onto the needle.

Then slide the boilie from the needle onto the bandage tape and secure it with a stopper.

How to attach a boilie to a hair mount?

To plant a boilie use:

• crochet hairline
• with a special needle for boilie attachment
• drill (for hard boilies - make a hole for the needle)
• stopper (a piece of Hungarian or stationery eraser)

Nozzle sequence:

1. Make a through puncture in the boilie in the center. The needle should protrude 1 cm from the opposite side
2. Insert the hook of the needle into the loop of the hair montage
3. Pull the needle and hair in the opposite direction
4. Insert a stopper into the resulting loop
5. Pull the hair from the side of the hook and rest the stopper against the nozzle.

How to attach mini boilies to a hook:

• choose a suitable hook
• make a through hole in the boilie with a needle, nail, etc.
• insert a thin line of 0.2 mm or less into the hole
• tie a piece of match or toothpick to one end of the fishing line
• tie the second end of the fishing line on a hook, the knot should not slide along the hook

How to attach boilies to a carp hook?

It is not difficult to place a boilie on a hook. A thin through hole is made in the ball. This must be done carefully. Pass the fishing line through the boilie and make a loop on the other side at the end and insert a stopper into it.

The second end of the fishing line is tied to the hook. This method is considered the easiest when setting a boilie for carp fishing.

Smell is the main factor in attracting carp when fishing with boilies. Naturally, there are no universal baits, since each type of fish has its own taste whims: carp prefers boilies with fruity, sweetish odors, crucian carp really likes the aroma of vanilla or garlic, and roach bites well on baits with the aroma of roasted seeds or almonds.

In addition, you need to take into account weather conditions, fishing season, and time of day. In other words, when planning to fish with boilies, you need to select a whole arsenal of baits with different smells, colors and sizes. This article will tell you which boilies are best for carp.

Types of boilies

According to the buoyancy criterion, boilies can be divided into three groups:

• drowning;
• floating;
• with neutral buoyancy.

A type of floating boilies is called pop-up.

At a time when boilies were just gaining popularity, they were attached directly to the hook. However, soon the fishermen came up with new, more effective options attaching baits. First of all, the so-called hair rig, which involves attaching boilies to a fishing line next to the hook.

Hair attachment of the boilie to the hook

Blind and sliding equipment for boilies

Sliding carp installation "inline"

Making hair accessories

1. Take a piece of fishing line (about 30 cm long) and tie a loop at one end.
2. Use a special needle to pick up the loop you have made and place the boilie on the leash.
3. After this, a stopper is inserted into the loop to secure the bait.
4. Next, holding the boilie with a large one and index fingers, begin winding the line around the shank of the hook.
5. After making 7-8 turns, you need to pass the end of the fishing line through the eye of the hook.
6. By tightening the knot, you can attach the leash to the main fishing line.

Boilies belonging to the floating type are not boiled in boiling water, but cooked in the microwave. Because of this, the baits come out lighter, and therefore their degree of buoyancy increases. However, floating boilies also have the disadvantage of being loose.

Boilies of this type are not subject to heat treatment. Dust boilies for carp are made without the use of eggs (the place of the binding component is taken by syrups, honey, molasses) and are simply dried. After the bait gets into the water, it begins to gradually dissolve, shedding one layer after another. If high-quality attractive components are added to the bait, such boilies will immediately attract the attention of carp swimming nearby.

The size of the hooks may vary, depending on the size of the boilies and the desired catch. When choosing hooks, you need to pay attention to the strength and sharpness of the products.

In most cases, carp are hooked on their own, and therefore the fleshy jaw breaks through not after a strong hook, but under the weight of the fish itself. That is why the hook must be very sharp and reliable.

The best option is forged hooks with a short shank. Ideally, the distance from the shank of the hook to its sting should be approximately 1/3 or 1/2 the size of the boilie.

The sizes of the baits themselves can also be quite different, 5-30 mm. Small boilies are used more often for hunting carp that are too cautious or not very active. Lures large sizes The good thing is that when using them, unnecessary biting of small fish is eliminated. In addition, you can always make a smaller bait from a large boilie by simply cutting the bait in half.

Related article: bait boat for fishing!

It is still not known for sure whether the color of the boilie really matters. Be that as it may, for bottom fishing in reservoirs with a clean bottom, it is recommended to use light-colored baits.

In the middle layers of water they fish with red, orange, yellowish boilies, which, according to legend, can attract the attention of carp not only with their smell, but also with their appearance.

For bait, boilies similar to those used directly as bait are used, that is, the colors, sizes and, above all, smells of the baits must be the same.

Rating of boilies for carp

1. CC More
2. Dynamite Baits
3. Mainline
4. Nutrabaits
5. Rod Hutchinson
6. Den Baits
7. Solar
8. Richworth;
9. Tandem Baits;
10. Prologic.

Carp on boilies underwater (video)

We recommend our separate article on the topic homemade boilies for carp, where you will learn about the components and process of making boilies at home.

Related articles:

	Review of carp rods
	Cobra for boilie throwing
	Bite alarms	Feeder fishing on flat feeders

	DIY fishing crafts
	Review of the best balancers for ice fishing
	Fishing with jigs: varieties, gear, fishing techniques
	Types of fish finder echo sounders for fishing
	Review of aluminum fishing boats
	How to choose a spinning reel?
	Electric motors for inflatable boats (review)
	Aluminum fishing boats

Boilies are one of the best baits for carp fishing. Essentially, they are dough balls prepared using a special technology. These balls are made in different sizes, usually from 0.5 to 3 cm and are filled with different flavors with the aroma of plant or animal, spicy or sweet food.

Most carp anglers fish exclusively with boilies, because this bait really has practically no competitors on the market, because they:

The only negative is the rather high price of the bait. Boilies from well-known brands are indeed not cheap, but the price is clearly justified when fishing. If you are seriously focused on catching carp, then you simply have nowhere to go and will have to purchase this miracle bait.

For beginners, we will go through all the points that an angler should know to start fishing with boilies. Let's look at what they are, which carp prefers most, how to put them on a hook, and so on. I hope you enjoy the information, and most importantly, find it useful on future fishing trips.

Boilies can be divided according to the following criteria:

• size;
• aroma;
• color;
• buoyancy;
• manufacturer.

Each of these criteria has a certain impact on fishing efficiency. So, the size will allow you to choose a boilie for the expected size of the fish, the aroma will allow you to choose the optimal bait to increase the number of bites, the color will also help improve the bite, but we will talk about this and more below and analyze each point in more detail.

What boilie size to choose

When fishing for carp, choose boilies with a diameter of 8 mm or more to eliminate bites from various small fish and focus solely on carp fishing.

For a novice fisherman, it is better to start by using this bait with a diameter of 10-14 mm, but in general, when catching large carp, boilies up to 30 mm in diameter are used.

Beginners often worry that the carp will not be able to swallow such large bait, but in fact, this fish has a very large mouth and even a two-kilogram carp can easily swallow a boilie more than 20 mm in diameter.

But it’s still not worth starting with large balls right away. Try with 10-14 mm, look at the number of bites and catch sizes, and then try increasing the size of the bait and compare the results.

In addition, the fishing season should be taken into account. So, in spring and autumn, smaller boilies will be preferable, and in summer it is better to use a larger nozzle.

Which boilie flavors to choose for carp

There are a lot of boilie flavors and every fisherman has his own favorite ones, which bring the greatest success. But it's not that simple. The smell of the boilie is mainly selected depending on the season, because at different times of the year the taste preferences of the fish change.

First of all, you, as a beginning carp angler, should know that cold water the aroma spreads worse, and in warm water even a barely perceptible smell is easily perceived by the fish long distance. This knowledge should prompt you to the fact that in spring and autumn you can use brighter, richer and sharper aromas of bait, and in the summer, when the water is well warmed up, a pungent smell, on the contrary, can scare away the fish. In the hot season, it is necessary to choose boilies with a gentle, non-pungent odor.

If you have been fishing for carp before, you probably know that in the spring and autumn the fish prefers animal food, and in the summer it switches to less nutritious plant food. The same applies to boilies - in spring it is better to offer carp bait with a higher fat content, and in summer - lighter bait. When purchasing boilies, consult a consultant in the store about this.

• tutti-frutti;
• white chocolate;
• plum;
• pineapple;
• strawberry;
• banana;
• crab;
• fish meat.

There are many other suitable scents, but they are not suitable for all bodies of water. But the above scents work great in almost any place.

Is color important?

The color of the boilie is not so important, but the site advises novice carp anglers to use yellow or green bait and now we will explain why. The fact is that the underwater world mainly consists of yellow and green shades. When you are underwater, even the mud has a yellowish-green tint. Thus, by offering a yellow bait, you do not go beyond the color boundaries of the underwater world and the fish approach it with less caution.

But sometimes you can get the fish to bite only on some contrasting colors - purple or pink, for example. Carp's love for brightly colored boilies may be due to weather conditions or the reservoir itself. As you gain experience, you can begin to experiment with bait colors, tracking which ones work best on your lake, pond or river.

Beginners may not know, but boilies can be floating or sinking, and this feature should definitely be taken into account when fishing. The choice of floating or sinking bait depends on the nature of the soil in your pond.

If the soil is hard - stone, sand or other dense rock, then you can safely use a sinking boilie. But if the bottom of the reservoir consists of a thick layer of silt, then the sinking bait can simply hide in this silt and the carp will not be able to find it. In the case of soft ground, into which the bait can fall, it is better to use floating boilies, the same applies when fishing in the grass or on large stones, between which your bait can fall.

Over time, as you become familiar with how sinking and floating boilies work, you can experiment with combining the two types of bait on the same hairline. Experienced fishermen call this combination “Snowman”. Or learn how to make baits with neutral buoyancy - combining half a buoyant boilie with half a sinking one on one hair.

Reliable manufacturing companies

Boilies are an expensive bait designed for catching trophy fish. A good boilie contains many ingredients that make it good, which is why its price is high. But you shouldn’t save money here, and the site recommends that you purchase goods of decent quality from reliable manufacturers.

By buying cheap boilies, you risk throwing money away. A cheap bait can disappoint you when fishing and will certainly not work as well as the original one from reputable manufacturers. If your main goal is a positive result, then do not skimp on quality bait.

There are quite a few manufacturers of boilies and here are the most famous of them, which have proven to the whole world that they know how to make bait that carp like:

• Richworth;
• Dynamite Baits;
• Tandem Baits;
• Nutrabaits;
• Mainline;
• Prologic;
• StarBaits.

This is all the basic information on the boilies themselves, which will help you make a specific choice for good result on a fishing trip. Below I would like to talk about various nuances and subtleties.

The boilie is hooked differently than you are used to hooking, for example, or, although corn can be hooked in the same way. Special hair equipment is used for this.

This equipment is quite simple and very effective. The principle is that the boilie is inserted through the hair and secured at the hook itself. Thus, next to the boilie there is a completely free hook, which easily penetrates the soft tissues of the fish when it tries to swallow the bait.

Mounting with hair equipment is sold in any fishing store. Hair accessories may differ slightly from each other, have, for example, different lengths of hair under different size baits, but the installation principle is absolutely the same.

To attach the boilie to your hair you will need:

• boilie drill;
• a special needle with a hook for pulling hair through a drilled hole;
• stoppers in order to fix the bait on the hair.

Special kits are sold for installing hair accessories, so there won’t be any problems with this.

Sequence of setting the boilie:

• first a hole is made in the boilie;
• using a special hook, the hair is pulled through the drilled hole;
• Now all that remains is to fix the boilie on the hair using a stopper.

At the end there will be a video from which you will learn how to place boilies on a hook using hair equipment and even mount such equipment yourself.

Important “little things” when fishing with boilies

We have discussed the main points regarding the selection and use of such an effective bait for catching carp as a boilie, but there are even more subtle points that can quite significantly affect the outcome of the fishing. Let's look at them too.

Over time, you will gain experience and learn how to use boilies very effectively. In the meantime, you got the best important information in order to successfully begin to develop in carp fishing with the help of such a wonderful bait. The site is confident that everything will work out for you and wishes you neither tail nor scales!

By the way, you can mount the hair equipment yourself and do it quite simply. Below is a video on how to make it yourself hair editing and how to put a boilie on a hook.

For those who are simply interested in the question of what boilies are, I will answer - this is a bait rig that is very popular in the West among carp fishing enthusiasts. Preparing a boilie is usually very simple: balls of a mixture of corn and soy flour, semolina and eggs are boiled in boiling water and the result is a kind of fish dumplings. Boilies have become very popular because... allow you to cut off bites from small fish and catch really large specimens of carp, barbel, trout and some other fish.

Let's start in order. To catch carp with boilies you need hooks. Unlike in the West, where there are even special hooks for carp, you can take a regular dark forged hook with a ring and a short shank. To catch a 6-kilogram carp, hooks No. 7-8 will be sufficient, and boilies for such hooks need 16-18 mm in diameter.

Fishing line for carp with boilies

Fishing line. The most ideal option is wicker. But braided line- an expensive thing, so you can try to get by with thin braided fishing line as a leash. The most important thing here is to decide on the length of the leash - the shorter it is, the higher the chance of a wary carp spitting out the boilie, and the longer it is, the lower this risk. However, a long leash (more than 20 cm) already requires a rather heavy weight and, accordingly, a stronger one.

You shouldn’t neglect the sinker, because a boilie as such requires a sinker weighing at least 50 g, and for self-hooking carp you need a weight of at least 80 g. For a soft muddy bottom, a lead ball is suitable, and for a clay bottom, an olive-shaped sinker.

Place the boilie on the hook

To successfully catch carp, you need to properly attach the boilie to the hook. If you simply put it on the hook, then there is a high probability that the fish will spit it out when hooked. Therefore, the hook must be kept free and slightly to the side. Usually, to attach a boilie, a special needle is used, with which it is attached to the end of a thin braided fishing line left over from a leash tied to a hook. On the shank of the hook, a thin cambric should be used as a clamp so that the hair with the boilie goes down from the middle of the hook (as in the picture). When the needle with the hair passes through the boilie, it must be disconnected and a loop should be made at the end of the hair for the stopper. After securing the stopper, move the boilie close to it.

At what distance from the hook is the boilie attached?

The length of the hair is calculated approximately like this: for an 8 mm boilie its length should be at least 2 cm, and for a 16 mm boilie - 4 cm. An excellent option is to take the thinnest hair from a braided line, i.e. 0.05-0.07 mm in diameter. However, then it must have a separate fastening, since a leash of such a diameter will be clearly weak.

Boilies are divided into two types: sinking and floating. The boilie can also be adjusted using pellets, setting the desired depth.

How to prepare boilie at home?

The simplest boilie can be very easily prepared at home, for this you need:

I give a recipe based on 1 kg of dough

mix semolina (or corn grits) and birdseed, taken in equal parts and grind in a coffee grinder. This mixture is about 45% of total mass dough (450 grams) Add 5% fish meal, 5% bone meal, 45% soy flour and 10 ml sunflower oil. Add 5 teaspoons of cinnamon, cumin, garlic and add 10 eggs. All this can be kneaded into a homogeneous dough, which can be tinted with various food colors.

European fishermen were the first to use it for fishing in the 80s of the last century. The main ingredients of the first baits were:

• corn flour;
• soy flour;
• semolina;
• eggs.

In a short time, the bait gained popularity among carp fishermen, as it made it possible to purposefully hunt for large fish. Small fish are simply not able to swallow a large boiled ball. Despite the large assortment of boilies on sale, many fishermen successfully use homemade baits.

Boilies can be used as bait and bait. They have the same aromas and taste, but only in bait boilies there is a poor concentration of flavors and dyes.

There are two types of boilies for fishing:

• drowning;
• floating.

The difference between these types is laid down at the preparation stage. To make the boilie sink, the rolled balls must be boiled and then frozen. This bait will lie on the bottom for a long time, waiting for a large fish to approach. When fishing in the current, it is necessary to use sinking boilies.

Floating boilies must be cooked in the microwave. The bait turns out fluffy and light, while the buoyancy of the balls increases. One of the disadvantages is the looseness of the bait, which does not allow the boilie to remain a ball for a long time.

How to attach boilies so that they do not fall apart when casting and fishing in the current

Since the boilie is a rather fragile bait, when baited directly on a hook made of thick wire, the bait cracks. Then, already in flight during a long cast, the boilie falls off the hook. Therefore, anglers have to use other methods of attaching balls to.

The most common way to attach boilies is with a hair rig. The installation principle is as follows. The hook remains open, and a boilie is attached to it on a thin hair.

To do this, a thin axial hole is made in the ball using a special needle or thin drill. Then a loop of hair is passed into the hole, into which a stopper is inserted in the form of a small piece of a match, a toothpick, etc.

The other end of the hair is mounted to any reliable hook. A properly placed boilie should be located immediately behind the hook. The fish tastes the delicious bait with its lips, does not feel any catch, so it decisively swallows the boilie along with the hook. Even if she later wants to spit out the suspicious bait, the tip of the hook will catch on the soft tissue.

Any fisherman can make catchy boilies with his own hands. This does not require deep culinary knowledge and skills. The boilie preparation technology is as follows.

• First you need to knead the dough from different types of cereals, flour and other ingredients.
• The finished dough must be rolled out into a sausage shape, which is then cut into pieces of the required sizes.
• Balls are made from pieces of dough.
• The balls need to be cooked in the microwave (floating boilies) or boiled and frozen (sinking baits).
• After the boilies are cooked, it is important to dry them thoroughly. The drying process may take several days.

Recipe for making catchy boilie

To prepare boilies for catching carp, carp, crucian carp and bream, the following set of ingredients is suitable:

• corn flour - 1 cup;
• soy flour - 1 cup;
• semolina - 2 cups;
• powdered milk - 1 glass;
• fresh eggs - 10 pcs.;
• vegetable oil - 2-3 tablespoons;
• food coloring - 1 teaspoon;
• flavorings are added in small quantities depending on the season of the year.

First you need to thoroughly mix corn and soy flour, as well as semolina and milk powder. Eggs, oil, coloring and flavoring are added to a homogeneous dry mass. The mixture must be thoroughly mixed into a dough-like mass. The resulting dough is rolled into sausages, and then balls of the required size are made.

To make catchable boilies, fishermen use flavoring additives.

• Deeps.

These aromatic liquids are purchased at fishing stores. They can be added during the preparation of the dough, and it is best to treat the boilie with them immediately before throwing the bait into the pond. Depending on the manufacturer, the amount of dip per 1 kg of dry mass is required from 3 to 10 ml.

• Spices and seasonings. Dry aromatic additives can also be successfully used in the manufacture of boilies. This is cinnamon, which is added at the rate of 15 g of ground powder per 1 kg of dry weight. To give the bait a chili flavor, add 1 tbsp. a spoonful of ground red pepper per 1 kg of dough. To give your boilie an aniseed scent, add crushed anise seeds or oil.

The general rule for using flavorings is quite simple. Dry bulk flavorings are added to the dry mass; for liquid additives, it is better to mix them with raw eggs.

In the process of preparing homemade boilies, the angler must make several different bait options. They should differ in buoyancy, size, color and smell. Only then will it be possible to find a key for capricious and finicky fish.