The durability of the product depends on proper inflation of the ball. If you have a ball lying around that hasn't been used for a long time, it's time to bring it to the combat readiness possible available means.
To avoid a recurrence of such a situation, it is recommended to purchase sports equipment for the future. As a rule, the kit includes a pump, a needle, and silicone lubricant. Today we will talk about how to inflate a ball without a needle in “Spartan” conditions.
Let's consider the important aspects in order and provide practical recommendations.
Method number 1. Syringe needle, bicycle pump, electrical tape
- A positive feature of this method of inflating a ball without a needle is the relative availability of materials. You can buy a syringe at any pharmacy, electrical tape at a hardware store, bicycle pump found in almost every home.
- A negative characteristic is that the necessary pump, much less a syringe, may not always be at hand. The guide below will help you make a needle for the ball so that you can subsequently inflate the product with the resulting “tool”. So let's get started.
- Take a syringe needle, sharpen it on the asphalt or curb, use a knife sharpener. It is important that the tip is blunt and not pointed, otherwise the needle will pierce the nipple, exposing the ball to damage. She should enter it smoothly, and not jump in in an instant.
If possible, use a medical needle with a wide diameter (blood transfusion system), it is strong enough and does not bend or break.
- After sharpening the needle, wrap electrical tape around its base so that when the air enters the ball, it does not escape back.
As a rule, 10-12 layers are enough to create a kind of adapter that will allow you to inflate the product quickly. All you need to do is insert the needle into the deposit and then begin the procedure.
Method number 2. Compressor
The method is especially relevant if you need to pump up your football or volleyball while on the road.
- The advantage of this method is that you will find a car service in almost every locality. The guys will help you pump up the ball for a nominal fee, or they won’t charge you a penny. At the same time, they may have a needle of the right size, which is good news. The method is suitable if you have absolutely no tools for pumping up the ball.
- The disadvantage of this method is the possible incompetence of car service workers who, through negligence, can overpump the product. Such an oversight will lead to an explosion and damage to the ball, but it’s still worth the risk.
- Many car service centers pump up tires, and gas stations also provide similar services, completely free of charge. With the help of a powerful compressor, the air flow comes out under pressure, which is what you need.
- Bring the hose with the nozzle to the surface of the deflated ball, press firmly and turn on the device at maximum power. Pump the product until it becomes sufficiently hard. If possible, carry out the procedure together: the first person turns the compressor on/off, the second holds the ball and presses the cord, controlling the degree of inflation. It will not be superfluous to know that many modern compressors are equipped with a special nozzle for pumping balls.
Method No. 3. Syringe
- The technology of inflating a ball using this method is rightfully considered exhausting. The method is an alternative to the first option, but to implement it in reality you only need a syringe (preferably large) with a needle and 2 hours of free time. The duration of pumping depends on the volume of the syringe that will be used for the procedure.
- Perhaps this method does not have positive characteristics. Unless, eventually, with patience, you will be able to pump up the ball. A negative feature is the fact that the method is very tedious, time-consuming and unprofitable.
You risk damaging the nipple, as a result of which the ball will constantly deflate (if you do not use silicone lubricant).
- The essence of inflation in this way is that air is introduced into the cavity of the ball using a conventional medical syringe large volume.
If the syringe is 20 cc, you will inflate the product in 30-40 minutes; in the case of ten cc instruments, it will take about 60-120 minutes.
- To carry out the procedure correctly, lubricate the nipple with silicone oil or any other alternative.
Fill the syringe with air, insert the needle into the corresponding hole, and press the lever. Take out the tool and repeat the steps until the ball is inflated to the desired state. If desired, you can pre-sharpen the needle so that its free edge becomes dull.
How to inflate a ball with a needle without a pump
If you find a needle or make one yourself, but don’t have a pump at hand, this method just for you.
- First you need to make an adapter. An ordinary plastic soda bottle serves as a homemade pump. If desired, you can replace the container with a very thick plastic bag without holes.
- Screw the needle into the bottle cap or solder it using the appropriate tool. As you can see, you have an adapter, now screw on the cap and check if any air comes out.
- Lubricate the nipple with silicone-based oil and insert the homemade unit. Using a convenient method (with your hands or feet), squeeze the air out of the cavity of the container so that it goes into the ball. Pull out the needle, inflate the bottle, repeat the previous manipulations until the desired effect is obtained.
There are not many ways to inflate a ball without a needle, but this does not mean that the idea is a failure. Use a medical syringe, electrical tape and a bicycle pump. Ask the car service center to pump up the product using a compressor and install a nozzle on the bottle.
Video: how to inflate a soccer ball if there is no needle
Source: http://healthjw.com/kak-nakachat-p338.html
How to inflate a ball
Screw the pump tip into the hole on the ball and start pumping air. Stick the pump into the hole in the ball and begin pumping air into the ball. It is best to use a pump.
By the way, most modern car pumps have a bunch of nozzles, with their help you can pump up a ball, there is such a needle. If you want to pump up already inflated ball, then you will need a spoon or a dull knife to remove the plug from the nipple.
Place the deflated ball between the box and the wall and locate the ball nipple. You will also need a ball or bicycle pump with a cone tip.
Some models gymnastic balls There is no safety valve that can be closed and opened at any time. In order to inflate such a projectile, you will need a pump with a needle.
Insert the needle into the nipple and begin the inflation process as usual. Remove the pump from the ball and quickly insert the plug. The needle must first be blunted: it should not pierce the nipple, but smoothly enter it.
Needles from blood transfusion systems are ideal: they are quite thick and durable.
Attention!
If trouble overtakes you on the road, then, with some effort and a little ingenuity, you can inflate the ball using a simple bicycle pump, electrical tape and a syringe needle.
Even the lack of a pump shouldn't stop you. Advantages: Another “medical” method, but this time requiring neither a needle nor a pump. The density should be monitored very carefully to avoid over-inflating or exploding the ball. It is better to carry out the procedure with three people: two press the ball, one should turn off the compressor at the signal.
There is no need to try to inflate the ball to the diameter specified in the instructions: 85-95% will be quite enough for comfortable and productive activities. If you inflate the ball too much ( larger size indicated by the manufacturer on the packaging), then it will be difficult for you to maintain your balance on it.
Most likely, it will not be possible to pump the ball up to the required density, but pleasure from the process is guaranteed!
Source: http://lemuriania.ru/kak-nadut-myachik/
How to inflate a ball without a needle in artisanal conditions
How to inflate a ball without a needle artisanal conditions
Playing football in the yard or in nature is a young thing: even if you are over 50, by regularly playing sports, you will feel like you are in your 20s.
But what to do if the ball you took with you is deflated, and the question arises of how to inflate the ball without a needle and pump in makeshift conditions (beach, nature, someone else’s yard)? Naturally, it would be better to take care of this and take with you a bicycle pump and a needle (the cost of which is no more than 150 rubles).
But, if the above equipment is not at hand, all is not lost! But remember that the methods listed below are far from the safest for your ball: it can simply be overinflated and ruined, so if we are talking about a rarity with the autograph of your favorite football player, then it is better to postpone such manipulations.
How to inflate a ball without a needle: the “medical” method
Advantages: low cost of the method, availability of materials. Everything can be found in a roadside pharmacy and the glove compartment of a car.
Disadvantages: in the outback there may not be a similar pharmacy. In addition, the instructions below are not an answer to the question of how you can inflate a ball without a needle: these are instructions on how to make such a needle.
The essence of the method
If trouble overtakes you on the road, then, with some effort and a little ingenuity, you can inflate the ball using a simple bicycle pump, electrical tape and a syringe needle. The needle must first be blunted: it should not pierce the nipple, but smoothly enter it.
Needles from blood transfusion systems are ideal: they are quite thick and durable. The tip of the needle should be dulled on asphalt or a knife sharpener. The result should be a needle with a blunt end, which will serve as the basis for the adapter from the pump to the ball. Next, carefully wrap electrical tape around the base of the needle.
It will take about 12 layers. This is done so that the needle fits tightly into the pump hole.
The road method: how to inflate a ball without a needle using... a car service
Disadvantages: a car service center may not be nearby at the right time. An inexperienced worker can overinflate the ball, which can cause it to burst from excessive pressure if inflated carelessly or during play.
The essence of the method
It is known that the most popular service in car services is tire inflation. The compressor used for this can supply air at high pressure, which is what we need.
The deflated ball should be pressed very tightly against the compressor nozzle and inflated until the desired level of hardness is achieved. The density should be monitored very carefully to avoid over-inflating or exploding the ball.
It is better to carry out the procedure with three people: two press the ball, one should turn off the compressor at the signal. By the way, on many modern models Compressors have a nozzle for inflating balls.
We give air injections: how to inflate a ball without a needle: an alternative but very grueling way
Advantages: Another “medical” method, but this time requiring neither a needle nor a pump. All you should have on hand is a car first aid kit with a syringe and a few hours of time, depending on the volume of the syringe found.
Disadvantages: the method is exhausting and inconvenient. You can permanently damage the nipple of the ball, and it will deflate if you do not use special oil.
For those who don’t have either duct tape on hand or a car service on the road, there is another way to save a beach volleyball or street football tournament. The idea is to inject air into the ball through a simple syringe.
The volume of work to be done depends on the volume of the syringe: with a 20 cc syringe you can inflate the ball in about half an hour. 10 Ml – per hour. 5.2 Ml – is the game worth the candle? This is the most accessible and homemade way to pump up basketball ball without a needle, without having a compressor at hand.
To facilitate insertion of the syringe and preserve the ball, the nipple should be moistened with oil.
If there is a needle, but no pump
Advantages: Quite a fun and creative way to pump. Most likely, it will not be possible to pump the ball up to the required density, but pleasure from the process is guaranteed! In addition, the method is suitable for soft beach balls.
Disadvantages: the need to find a strong plastic bag or bottle. The need to make an adapter.
There are those who do not know how to inflate a soccer ball without a needle. But the lack of a needle is, as it becomes clear, a third of the problem.
The worst situation is for those who, for some reason, cannot use the pump, since it is still possible to create high air pressure using improvised means, but it is very difficult to direct it to a certain point (the ball).
You can use a plastic bottle or a thick bag as a compressor. Some craftsmen manage to solder a needle into the cap of a bottle and pump the ball over and over again while standing or carefully jumping on this bottle.
After the air from the bottle passes into the ball, the structure is taken out, another portion of air is pumped into the bottle and the manipulation is repeated. And so - until the bitter end!
There is a more advanced method using vinegar and soda: vinegar and soda are poured into the same bottle, and carbon dioxide is pumped into the ball. But this is provided that the needle is firmly sealed into the bottle cap.
As we can see, there are a lot of ways to inflate a ball without a needle. None of them are comfortable and easy, but a true athlete is one who, despite all the obstacles, goes to the bitter end!
Source: http://fix-builder.ru/remont/raznoe-o-remonte/47365-kak-sdelat-nasos-dlya-myacha
How to pump up a ball and what do you need to prevent your glasses from sweating?
Book dust jackets become shaggy at the spine quite quickly. To save them, it is enough to inside glue strips of thick paper.
We suggest painting the edge and stripe on a cardboard frame with a slide. With the help of colored tags, it is easy to divide the photo library by topic, and when displaying, avoid inverted and mirrored images.
If you don’t have a special needle at hand for inflating a nipple volleyball or soccer ball, use... an ordinary pharmacy pipette with an elongated spout.
Cut the rubber part a little and put it on the pump hose, and insert the glass part into the nipple hole of the ball. The ball is inflated with such a “needle” much faster.
To inflate nipple balls, a bicycle pump with a special needle is often used. But it doesn’t matter if it’s broken or you simply don’t have it at hand; An ordinary bicycle nipple with the rubber tube removed and installed with its threaded shank into the outlet of the pump will do the job quite well.
To quickly replenish the aquarium with water and not erode the soil, immerse the pan filled with water into the aquarium until the levels in both containers match. Then carefully turn the pan upside down and remove it from the aquarium.
Glasses should be wiped with a soft cloth (flannel), and optical lenses with a cotton swab moistened with alcohol.
Glasses can be cleaned well by wiping them on both sides with a cotton swab with a drop of glycerin, and then with a dry, clean flannel.
To prevent glasses from fogging up, you can lubricate them with a mixture of 3 parts by weight of glycerin, 7 parts by weight of liquid soap and a few drops of turpentine, and then wipe with a clean flannel.
Source: http://interesu.tk/index.php/home/2012-10-18-08-56-47/14-2012-11-16-11-51-35/110-2012-11-16- 11-50-47
TOGU: Rules for inflating a gymnastic ball with ABS®
You can inflate gymnastic balls using any pump (hand or foot), or with a compressor. If you decide to use a compressor, use the adapter that comes with the kit. For an accordion foot pump, you will also most likely have to choose the appropriate adapter - such pumps generally have a set of different adapters.
The secret of the ABS® system is the structure of the patented CRYLON® material, which has additional sealing layers. Thanks to this reinforcement, at the moment the ball is punctured, the hole grows much more slowly.
Inflating rules to ensure the ABS® system works:
Before inflating, the ball should be stored at a temperature of at least 20°C (68° Fahrenheit) for 2-3 hours.
Inflate the ball gradually until it reaches 80% of its maximum volume. Inflation should be carried out at room temperature or at a maximum air temperature of 25°C (77°F). Keep in mind that the ball may be very hard at this stage. Leave it like this for at least 2 hours.
Slowly inflate the ball to your optimal size (at room temperature). Never pump the ball beyond its maximum capacity. Note: Even if you pump slowly, the ball will feel hard.
This is due to the properties of the material, which has a certain similarity to leather to the touch. The ball will reach its optimal elasticity (softness) after a maximum of 2 days.
Since the ABS® ball, made from a “leather-like” material, takes longer to adapt to stretching than a regular, unreinforced ball, if not properly used, it may rupture during inflation.
After the final inflation phase, the ABS® ball should be left for 24 hours before use. This is necessary so that the “anti-burst” ABS® system adapts to the environment (optimal room temperature).
After 24 hours, check the diameter of the ball, as it may have increased as a result of temperature fluctuations in the room and expansion of the air inside the ball.
If the diameter has increased beyond normal, simply release the required amount of air so that the ball reaches the desired size.
Source: http://novasports.com.ua/ru/info/nakachuvannia-myacha-z-abs
How to pump up a gymnastic ball
To inflate a gymnastic ball, you will first need a special pump, which, as a rule, comes with the purchased equipment. If your case is an exception, purchase it separately, their price is not so high.
In any case, you can always find an alternative by using a regular bicycle pump, which many people from around the world have at home. Soviet Union. It is also worth remembering that without an appropriate needle, it will be impossible to inflate the ball with just a pump.
If you bought the ball and did not rent it or borrow it from friends for a while, it is recommended that you read the instructions. It is in the box with the ball. Most likely, you will need to remove all contents from the package.
Please note that there is no point in immediately inflating the ball to the maximum level, this way you can ruin it.
The process of filling the balloon with air must begin by assembling the pump: attach a small air hose to the pump, then insert a special needle. After connecting the pump and the gymnastic ball, start pumping it with air. Try not to overinflate the ball, aim for incomplete inflation (~80-85%).
Now leave the ball alone, after 30-40 minutes further pump it to the desired state. Pay attention to the diameter of the inflated ball.
Each model has its own limit, which is indicated on the packaging or in the operating instructions. Try not to go beyond these limits.
Attention!
Why is this even being done? This procedure, divided into two steps, is necessary, first of all, for the user of this ball. In the first step, you can make sure that the ball will not burst under you.
Do not forget that the inflation procedure, which takes place near an open fire, heating heaters or sources of danger, can lead to irreversible consequences. Take care of yourself and your loved ones.
Regardless of the purpose for which the ball was purchased (playing football, gymnastics, etc.), it should perfectly cope with the functions assigned to it. However, regardless of their purpose, balls deflate sooner or later, and everyone should know how to inflate a ball, taking into account its unique characteristics.
It is very convenient to pump up the ball with a car pump, which usually comes with a plastic nozzle, which is used to blow dust out of hard-to-reach places. By attaching the plastic tip to the nipple, you can easily inflate the ball.
If you are inflating a non-soccer ball, in order to prevent it from losing its original shape, you should not sit on it or kick it. If it is necessary to use a needle for the pumping process, then first a couple of drops of special oil are applied to the nipple hole, and then the needle is inserted. Oil is necessary to protect the walls and valve of the nipple from possible damage from the needle. To prevent drying and provide elasticity. The ball should be inflated to the value indicated next to the nipple.
It is not recommended to use oils not intended for inflating the ball, as they can destroy the nipple. The pumping needle must be perfectly straight. And using a pressure gauge to monitor internal pressure will help avoid over-inflating the ball.
How to pump up a gymnastic ball
A special pump is used to inflate gymnastic balls, which most often comes with the ball, but can also be sold separately. In situations where there is no special pump, a bicycle pump is perfect for inflation. Only in this case, it wouldn’t hurt to stock up on a special needle for balls.
How to inflate a ball without a needle
In situations like this, when you need to inflate the ball and don't have a needle, using a medical needle or an empty and clean ballpoint pen that doesn't have a metal core can be a great solution. In order for the homemade device to fit tightly into the pump tip, it (the tip) should be wrapped with insulating tape until the required diameter is formed. When using a sharp needle, it is important not to pierce the product.
Instructions
To avoid unnecessary problems with inflating the ball, it is recommended to check it more carefully when purchasing. Serviceable good ball must also be elastic. Otherwise there is a risk of a defective ball.
Quality test - throw it to a height of approximately 180 cm. If the rebound height is 120-140 cm, then the ball can be purchased. It’s even easier to do the same from head height, with the rebound reaching waist height.
It would be a good idea to check the nipple. Owners usually do this by applying saliva to it. There will be no air bubbles on a working nipple. To avoid hitting a ball with a surface defect, you need to throw it and watch its rebound. If the ball bounces after being hit different sides– the ball is defective.
To inflate the ball, use a car pump, which should include a plastic nozzle designed to blow dust out of hard-to-reach places. By attaching the plastic tip to the nipple, you can begin inflating the ball.
If the ball is not , you should not kick it or sit on it, as it will lose its original shape. If a needle is used for pumping, then first apply a couple of drops of special oil to the nipple hole, and then insert the needle there.
The ball is inflated to the value indicated next to the nipple. In this case, the oil protects the valve and nipple walls from possible damage by the needle, gives it elasticity and protects it from drying out. If you don't have oil on hand, you can use saliva.
When pumping, do not use lubricants that are not intended for this purpose, as they can lead to destruction of the nipple. The needle itself must have a perfectly flat surface. To avoid overinflating the ball, it is recommended to monitor its internal pressure using a pressure gauge.
Learn to hit ball quite simple - we all know how to do this since childhood. But how to hit ball so that it flies strictly in a certain direction? Some write entire scientific treatises about this, some make educational television films, and some try to calculate the trajectory of the ball using probability theory. In fact, it all depends on the training, the more of it, the more accurate the shots.
Instructions
Strikes on ball two types: or from the summer. To improve the groundstroke, i.e. on a stationary ball, you need to keep your balance, and also remember about the correct placement of the supporting leg and the position of the kicker. The height of the kick depends on the position of the supporting leg: if it is in line with the ball, the kick will have a low flight trajectory, but if the leg is behind the ball, the ball will fly high. In order for the impact force to be maximum, it is necessary to monitor the position of the knee of the striking leg. If at the moment before the ball touches the knee is above the ball or in line with it, the force of the blow will be maximum. After the strike, it is advisable to continue moving towards the target rather than stop. When the body tilts back, the trajectory of the ball increases; when tilted forward, the blow becomes stronger, but the ball flies lower. When hitting ball While in the air, balance and all of the above leg positions are also important. However, in this case it is also important to calculate the distance to the ball. In no case should you volley if the ball is too far or too close, as in these cases the strike will be blurred.
Strikes are also divided according to application methods, i.e. depending on which part of the foot strikes. So a blow with a toe is usually applied to a stationary ball into its lower sector, in this case the angle of departure of the ball will be 40-50 degrees. To properly deliver this kick during the run-up, the player accelerates as he approaches ball The supporting leg is placed behind and slightly to the side of the ball, and the kicking leg strikes with a swinging motion. The body is tilted forward. When delivering this blow, the correct use of the hands is important: the hand opposite the supporting leg is sharply back in front, while the other is brought forward to chest level. At the moment of impact, the hands change places.
Using the inside of the foot, you usually simply pass the ball. Ideally, the ball should fly and not roll on the ground. When striking, the toe of the supporting foot is directed in the direction where you send the ball, the striking leg is bent at the knee, and the blow itself falls on the central part of the ball.
On impact outside feet, the toe of the supporting leg should be turned approximately 30 degrees towards the target. And the blow is delivered in the same way as the inside one, with the only difference being the plane of the foot in contact with the ball.
The lifting kick is the most difficult on one side, and the main kick on the other. Due to the contact of a large area of the foot with the ball during this strike, greater accuracy is achieved. If you deliver such a blow to a stationary ball, its flight path will be low. The supporting leg should be in line with the ball, slightly to the side of it, and the entire weight of the body should fall on this leg. The body is tilted so that the player's shoulders are above the ball. The kicking leg is bent at the knee and laid back, the ankle is relaxed. It is important to maintain the angle formed by the thigh and shin as long as possible. The climb is tense. At the moment of impact, the knee of the kicking leg is above the ball. The arm, which is the same as the supporting leg, is located behind, and at the moment of impact it passes forward and bends at the chest. The kicking leg immediately after the impact moves forward with the ball for some time. Lifting strikes are divided into two types: a direct lifting kick, when the ball comes into contact with the instep in its middle, i.e. lace up the boot, and hit the outer or internal part rise when the ball falls on either side of the lacing.
Strikes the flying ball In terms of technique, they are no different from lifting. However, if the ball is in the air, it is necessary to accurately calculate the moment of swing and contact. In this case, it is not necessary to put a lot of force into the blow, since an accurate touch will give ball enough energy.
In any case, achieving ideal accuracy and the required impact force can only be achieved through training.
When playing with the ball, it is important to achieve maximum control over it, since the point of the game is precisely that the ball flies exactly where you send it. How to hit correctly is an important topic for every player.
Instructions
If the ball is rolling on the ground or motionless, then the placement of the supporting leg and the trajectory of the kicking leg relative to the ball are also important. To control the height of a strike or pass, you need to control the position of the supporting leg in relation to ball. By placing your supporting leg on the same line with it, you can swipe with a low ball trajectory. And by placing your foot behind the ball, you can have a higher trajectory. The position of the upper body also matters - if you lean back, the ball will fly higher, and if you lean forward, the blow will be lower and stronger. In order for the impact force to be maximum, the knee of the kicking leg at the moment it touches the ball should be on the same line with it or a little further, above the ball. After the strike, you must continue moving in the direction of the target.
To strike with the inside of the foot, the supporting leg must be placed approximately 10 degrees from the ball and on the same line with it. The toe of the foot of the supporting leg should be directed towards the target, and the ankle of the striking leg at the moment of impact should be turned perpendicular to the supporting leg. The blow must be aimed at the central (height) part of the ball. After the strike, you need to continue moving towards the target. At good shot The ball should fly smoothly, without rolling on the ground or jumping.
To strike with the outside of the foot, the supporting leg must be placed not reaching the ball, and the toe must be turned 15-30 degrees away from the direction of the strike. This will allow you to strike accurately.
To hit with an instep, the supporting leg must be in line with the ball, with the toe of the foot pointed towards the target. The toes and ankle of the kicking leg should be tense and fixed at the moment of impact, the body tilted forward so that the shoulders are above the ball. To fly at a low altitude, you need to hit the ball or a little higher, hit inner surface toe.
To hit with the inside of the foot with a twist, the supporting leg must be placed next to the ball. Her fingers should be pointed either towards the target or at a slight angle away from it. The kicking leg swings and touches the ball top part thumb. The blow should be struck slightly below the ball (in height) and along its outside to add twist. After such a blow, you need to continue moving, but not towards the target.
To hit with the outside of the foot with a twist, the supporting leg must be placed to the left of the ball (for a right-handed person), its toes are directed towards the target or slightly turned away from the target in the direction of the twist. The kicking leg must touch right side ball with the outside of the foot. After the hit, you must continue moving in the direction of the ball.
To kick with your toe, your supporting foot must be placed behind the ball, with your toes pointed towards the target. With such a strike, the swing of the kicking leg is made quickly, with a slight movement of the hip, the toes of the kicking leg are raised and tense. The blow must be struck at the bottom of the ball to give it reverse rotation and a high flight path.
To hit ball in the air, it is important to adapt to the trajectory of its flight - you need to be at the correct distance from the ball. Moving in short steps, you need to accurately catch the moment to strike. Attention must be concentrated on timing the swing and contact - if the moment of contact is timed correctly, this will give sufficient force and accuracy to the blow. If the flying ball is already too close or vice versa, you do not reach it, you should volley. The technique of the strike itself is similar to the lifting strike.
Mastering the required striking technique requires a lot of practice. Beginners should hit the stationary ball, and for more advanced ones, practice hitting a rolling one. You also need to train different variations of dribbling before hitting - the willingness to strike from the situation dramatically increases their effectiveness.
Football is a simple game at first glance. Players appear to simply dribble and kick the ball, trying to get into the opponent's goal. In fact, they need to master a large number of skills. Hitting the ball is one of them.
Instructions
Place the ball at the penalty spot in front of the . Your task is to make an accurate shot, hitting the net. Take three large steps back from the ball. Take one step to the side. If you are right-handed, then move to the left. The left-hander, accordingly, moves to the right.
Approach the ball by taking the first step with your kicking foot. At the third step, the non-strike foot should be approximately 15 cm from the ball. Point your toes in the direction you want to launch the projectile. Keep both knees bent and arms wide to create balance. Repeat this and the previous step until these actions become automatic.
Bring your kicking foot forward and hit the center of the ball with the inside edge of your foot. Make sure your knee is directly above the ball when you kick it. Swing your foot over the ball so that at the end of the shot it is pointing towards the target of the ball. Add your ankle to the kick itself to add more power. You should get a cannon shot that will pierce right through the mesh if you did everything correctly.
In order for a soccer ball to serve you for as long as possible, it, like many other types sports equipment, requires proper care and compliance with operating conditions. The service life of the ball largely depends on these factors, as well as on the intensity of use of the ball.
Operating conditions mean, first of all, the type and properties of the playground surface and weather conditions.
There are several main types of playing surfaces:
– very hard (SUPER HARD), these are cinder areas, parquet in the hall, as an exception, asphalt area, etc.;
– hard, hard (HARD, TURF) made of various synthetic materials (can be used both indoors and outdoors);
– soft: soft ground, lawn.
There are several types of weather conditions, the main ones being: rain, snow, mud, high humidity and air temperature.
It should be understood that the materials used in the production of the ball, the design options for the ball and the resulting technical specifications, such as rebound height, moisture resistance, wear resistance are selected for specific operating conditions. Therefore, carefully study the pictograms on the ball; they will tell you which weather conditions and on which courts you can play with this ball model.
| – the ball is suitable for playing on soft ground, lawns with natural and artificial grass; | |
| – the ball is suitable for playing on hard courts with synthetic turf; | |
| – the ball is suitable for playing on sites with a very hard, hard surface, for example, cinder fields, hard synthetic surfaces, halls, asphalt is possible, but extremely undesirable, etc. For the production of balls suitable for this type of surface, materials are used that have increased wear resistance and abrasion resistance; | |
|
– the ball is suitable for use in conditions of high humidity and adverse weather conditions: rain, slush, dirt; |
|
| – the ball is suitable for playing at low temperatures 0...-2°С, on snowy surfaces, in conditions of poor visibility; | |
| – the ball is suitable for playing indoors (mini-football, futsal) and, if desired, for playing on small outdoor courts with a hard surface. |
Dear customer, we consider it our duty to emphasize that football is still a game on a grass lawn at temperatures above 0°C! Soccer balls in principle, they are not intended for playing in extreme conditions, such as, for example, frost - 20 ° C or asphalt. This does not mean that it is impossible to play with them in such conditions, of course you can, but the service life of the ball is reduced by 3-5 times, and difficulties arise when returning the goods under warranty, since the defect is not a manufacturing defect, but is a consequence of violation of operating conditions .
Operating instructions
Attention! Before pumping for the first time, you need to perform the following actions with the ball: straighten the ball as much as possible and shake it so that the camera is freely and centrally located inside the ball.
Due to the specifics of packaging, transportation and storage of balls, wrinkles and creases sometimes form on their tires (the outer layer of the ball), which after some time (depending on the type of tire material and other factors) disappear and the ball becomes smooth. The same applies to the shape of the ball; after inflating, leave the ball in an inflated state for a while, the panels and seams will straighten out, it will become round and even.
1. Inflate the ball as follows: apply 1-2 drops of special oil to the nipple hole or needle, take the ball by the panel where the nipple is located, insert the needle into it, inflate the ball to the pressure value indicated in the figure around the nipple. We strongly recommend using oil; it not only prevents damage to the valve and nipple walls when the needle penetrates, but also makes the nipple material more elastic and protects it from drying out. If there is no oil, moisten the needle or nipple with saliva, but under no circumstances use lubricants not intended for inflating balls; such substances may contain active components that destroy the nipple material. The needle must also be special, suitable for inflating balls; the tip of the needle must be even, smooth, without sharp edges or burrs.
Attention, always use lubricants on the nipple or needle, otherwise you risk damaging the nipple and being left without a ball!
It is recommended to always check the pressure in the balls using a pressure gauge. Over-inflating the ball creates increased pressure and excessive tensile stress on the panels and seams of the ball, significantly reducing its lifespan.
2. After play, loosen the ball slightly using a needle and oil (saliva) to relieve stress on the panels and seams of the ball, thereby maintaining their elasticity and shape. When a ball is constantly inflated to maximum pressure, the panels stretch out, the tightness of the seams weakens, the ball wears out faster, absorbs more moisture, and its playing characteristics deteriorate.
Please note that latex bladders (they are found in most footballs, sometimes mini-footballs) tend to bleed air slightly, which creates the impression of being “deflated.” This is an absolutely normal phenomenon and can be easily corrected by inflating the ball.
Care and storage instructions
1. After each game, wipe the ball with a damp cloth. In case of heavy soiling, use a cloth soaked in warm soapy water; under no circumstances use abrasive cleaners, or products containing solvents or other aggressive substances.
2. Let the ball dry naturally. If the ball is very wet, first wipe it dry with a soft cloth. Dry the balls in a well-ventilated place, away from heat sources, at a temperature of +20-25°C and a humidity of 60-65%. Avoid exposure to direct sunlight and never dry the ball near or on the surface of heating devices. Prolonged exposure to dirt, moisture, and elevated temperatures lead to a deterioration in the physical properties of the ball, and, as a result, its playing characteristics, and a reduction in service life.
3. It is recommended to store balls in a dry, ventilated place at a temperature from +5°C to +25°C and a relative humidity of 50-80%. Balls must be protected from direct sunlight, exposure to vapors, gases and chemicals.
Following the above simple rules will save the life of your ball for a long time!
We wish you a wonderful game and amazing victories!
Probably, each of you wondered how to maintain the nipple of the ball, how to properly inflate the ball? Unfortunately, I couldn’t find anything intelligible on the Internet. But today, we have come to the point where we can tell you about all the subtleties that arise when inflating a ball with a pump. Let's go:
1) Use ONLY a special needle that is designed for inflating balls (see picture below) The needle should be smooth and without any scratches or burrs, they will significantly reduce the life of the nipple. Do not try to inflate the ball without a needle by simply pressing the pump/hose. At best, you won’t succeed; at worst, the nipple will fall inside the ball and you will end up in need of a ball repair or a new ball.
2) You need to insert the needle STRICTLY VERTICALLY, after dipping the needle into a special lubricant. Lubrication will help extend the life of the nipple and maintain its elasticity (lubricant will soon be available for sale in our group - https://vk.com/sosokservice). As a last resort, spit liberally on the needle! If you insert the needle at an angle, you instantly damage the nipple - you tear it in the wrong place. The nipple is actually very soft and can easily be accidentally damaged.
3) While inflating the ball, the needle must not be allowed to move in ANY direction inside the nipple. No back and forth! Don't swing to the sides! This causes the nipple to gradually rupture.
Of course, it is impossible to firmly fix the needle while inflating the ball so that it does not move left and right, but the less the needle “plays” inside the nipple, the longer it will live!
4) Upon reaching the required pressure, remove the needle smoothly, without sudden movements. Voila, you have inflated the ball correctly!
— Excessive pressure does not affect the service life of the nipple. It only affects the geometric parameters of the ball.
— The fewer times we insert the needle into the nipple, the longer it will live, for this it is advisable to use a pump with a built-in pressure gauge to immediately pump up the required pressure. The fewer times we completely deflate and inflate the ball, the will live longer nipple - because rubber also oxidizes! We have observed a crumbling nipple many times for two reasons - oxygen and ultraviolet radiation. Hence, do not store balls in direct sunlight.
— Don't store balls in the cold, for example, in the car in winter. Every winter they often bring us brand new balls for repairs. The reason is that in the cold the air inside the ball is compressed, and when entering the gym they try to pump up the ball in order to start training. But they forget about something important - in the cold the nipple also becomes rougher, losing its elasticity. As soon as you insert a needle into a frozen nipple, you risk severe damage to the nipple. If you pump the ball after frost, then after long storage at room temperature.
P.S. We allow you to copy the text completely and without changes and use it on behalf of our blog.
